Custom Rainbow Pride Banners

Use these buying points to choose the right Custom Rainbow Pride Banners configuration.

1. Weight Follows Where the Banner Hangs

   Indoor lobbies, reception desks, and retail display walls work well with 11 oz PVC Flex. It's lighter, easier to hang from ceiling tracks, and doesn't need the extra thickness outdoor conditions demand.

   Any banner going up on a storefront facade, a parade fence line, or an outdoor community stage needs 16 oz. The heavier weight resists wind flex and holds the rainbow colors without sagging across a full event day. Pick your weight in the configurator before you upload your file.

2. Viewing Direction Decides Single or Double-Sided

   Single-sided works for any banner mounted flat against a wall, fence, or building face where viewers approach from one direction only. Double-sided with a blockout liner is the right call for banners hanging free from a rope, a parade pole, or a two-sided entrance. That liner is a white layer bonded between the two printed faces so both sides read clearly. Add the blockout liner option in the configurator if both faces need to read clearly.

3. Finishing Matches How You Mount It

4. Grommets or Pole Pockets

   Brass grommets spaced every 2 ft along the edges cover most outdoor setups: fence lines, storefront facades, and parade route roping. They work with zip ties, hooks, or bungee cord.

   Pole pockets suit banners sliding onto a horizontal rod or hanging from a ceiling track indoors.

5. Hem and Heat Weld

   Hem and heat weld alone fits frame-mounted displays where a clean sealed border matters more than hanging hardware. Select your finishing before checkout so the banner arrives ready to hang without extra trips to the hardware store.

6. Size Tracks Viewing Distance

   A 2 ft x 4 ft banner reads cleanly from roughly 15 to 18 ft away. It fits most interior walls and doorframes. A 3 ft x 6 ft banner suits storefronts and porch railings where viewers stand closer to the curb.

   For building facades or outdoor event stages where the crowd stands 50 ft or more back, go 4 ft x 8 ft or larger. Use the size guide on the product page to match your mounting location before finalizing dimensions.

Custom Rainbow Pride Banners print at their sharpest when your file arrives ready. Accepted formats are PDF, PNG, JPG, and AI. Vector AI files work best for logos because they scale without softening edges.

Resolution

minimum 150 DPI, recommended 300 DPI for banners under 4 ft. Viewers get close to smaller banners, and a soft edge shows up fast at that distance.

Bleed

add 0.25 in of artwork beyond the trim line on all four sides. This prevents white edges after cutting.

Safe zone

keep all text and logos at least 0.5 in inside the trim line so nothing crops at finishing.

Color mode

submit files in CMYK (the 4-color printing process using cyan, magenta, yellow, and black). RGB files convert to CMYK at print, and that conversion can shift rainbow hues. Convert before uploading for the most accurate color output. Worth knowing: this is the step most buyers skip, and it's where rainbow gradients drift most.