Custom Real Estate Banners

Use these buying points to choose the right Custom Real Estate Banners configuration.

1. Weight Comes Down to Where the Banner Hangs

   Short-term indoor open house signage fits 11 oz vinyl cleanly. Covered outdoor spots, like a carport entrance or a shaded gate, also work fine at 11 oz for a weekend showing. But any banner going up on an exposed fence or building facade for more than a few weeks needs 16 oz. Most agents default to 16 oz for outdoor listings without a second thought.

   The heavier material holds flat under wind load and doesn't pull loose at the grommets mid-listing. Worth knowing before you pick.

2. Single-Sided or Double-Sided Depends on Your Mounting Point

   Single-sided works for any banner mounted flat against a fence or wall where only one face is visible from the street. Order double-sided with a blockout liner (a white layer between the two print faces that stops image bleed) when the banner hangs free and traffic approaches from both directions. A driveway entrance is the clearest example: cars coming in see one face, cars leaving see the other. Add double-sided to your cart before checkout.

3. Sizing Your Banner for the Viewing Distance

   Here's the thing: letter height matters more than banner size. A fence-mounted banner reads clearly at roughly 1 inch of letter height per 10 ft of viewing distance. So a banner visible from 30 ft needs lettering at least 3 inches tall. For a building facade visible from across a parking lot or street, size up and let the configurator calculate seam placement for formats wider or taller than 10 ft.

4. Finishing Matches How You Plan to Mount

   Brass grommets every 2 ft are the fastest option for fence mounting with zip ties or bungee cords. Pole pockets work better when you plan to slide the banner onto a horizontal rod above a doorway or gate. Hem and heat weld (folded, heat-sealed edges with no hardware) suits frames or custom mounting setups. Select your finishing option in the configurator before uploading your file.

File format sets the foundation. We accept PDF, PNG, JPG, and AI files. AI (vector format) is the best choice for logos because it scales to any banner size without losing edge quality.

Bleed

0.25 in beyond the trim line on all four sides. Artwork that extends to the edge needs bleed so no white gaps appear after cutting.

Safe zone

0.5 in inside the trim line for all text and logos. Anything outside this margin risks getting cut or lost in a grommet hole.

Color mode

CMYK, not RGB. CMYK (cyan, magenta, yellow, and black) is how we print. RGB files can shift colors unexpectedly when converted, so set your file to CMYK before uploading.

Resolution matters more on smaller banners. The minimum is 150 DPI (dots per inch, the measure of print sharpness). For any banner under 4 ft where viewers stand close, push to 300 DPI so text stays crisp at arm's length.