Custom Metal A-Frame Signs
Custom Metal A-Frame Signs on angle iron frames. 6mm coroplast inserts, UV printed full color, 24x36 in or 32x48 in.…Custom Metal A-Frame Signs on angle iron frames. 6mm coroplast inserts, UV printed full color, 24x36 in or 32x48 in. Ships in 1 to 2 days.
Six steps from click to delivered booth
How to orderSpecifications
Custom Metal A-Frame Signs ship as a complete kit: a black angle iron frame and your printed 6mm coroplast inserts packed together and ready to display on arrival. The frame handles moderate outdoor wind without anchoring. Both sides show your graphic, so placement at any sidewalk angle works.
- Material
- Angle iron frame with black powder coat finish. Insert is 6mm coroplast (corrugated plastic, rigid and waterproof).The frame resists rust and the insert sheds rain without warping.
- Print Method
- Direct UV print applies ink onto the coroplast surface and cures it with ultraviolet light.The result is a scratch-resistant, waterproof finish that holds color outdoors.
- Color Output
- Full color across the entire insert face using CMYK printing (cyan, magenta, yellow, and black combined).Logos, photos, and bold text reproduce without color limits.
- Finishing
- Coroplast inserts slide into the frame from the top and lock in place with no tools needed.Swap inserts in seconds when your message changes.
- Size Range
- Standard insert is 24x36 in. Large insert option is 32x48 in.The large size suits busy streets or placements farther from the entrance.
- Indoor/Outdoor Rating
- Rated for both indoor and outdoor use. UV-printed coroplast lasts roughly 6 to 12 months in direct outdoor sun, longer indoors.The metal frame handles moderate outdoor wind.
- Single/Double-Sided
- Both sides display your graphic. Order single-sided or double-sided inserts depending on your placement.Foot traffic from either direction sees your message.
- Weight
- Metal angle iron frame weighs roughly 15 to 20 lbs.That weight keeps the frame grounded in moderate wind without anchoring on most sidewalk placements.
Features
Key highlights
- Angle Iron Frame With Black Powder Coat Finish
- 6mm Coroplast Inserts That Slide In and Out
- Direct UV Print in Full Color on Both Sides
Angle Iron Frame With Black Powder Coat Finish
Angle iron (an L-shaped steel bar that gives the frame its weight and rigidity) forms the backbone of every metal A-frame we build. The black powder coat finish (a baked-on paint layer that bonds to the steel surface) resists rust and chipping through rain, humidity, and daily outdoor exposure. You don't sand it, repaint it, or baby it between seasons. The frame holds up outdoors season after season without repainting, so your one-time investment keeps working at the door all day, every day.
Scratch resistance. Zero repainting.
6mm Coroplast Inserts That Slide In and Out
Coroplast inserts (corrugated plastic sheeting that's waterproof and rigid like cardboard) measure 6mm thick and slide into the frame from the top. No tools. No hardware. Swap graphics in seconds when your message changes, whether that's a weekly happy hour, a seasonal menu, or a new promotion. And because the frame stays put, you're only ever reprinting the insert, not buying a whole new sign. Color accuracy lives here, too: UV-printed color comes through sharp and consistent every time you order a fresh insert.
Direct UV Print in Full Color on Both Sides
Direct UV print (ink cured by ultraviolet light directly onto the coroplast surface) delivers bold, scratch-resistant color on one or both sides. Your logo, menu text, and photos come out crisp enough to read clearly from the sidewalk in full daylight. A2Z Printing Hub runs this process on every insert we ship. The color you approve in your proof is the color that shows up at your door.
Worth knowing: both sides display your graphic, so foot traffic approaching from either direction sees your message.
Customer reviews
For the price, these metal A-frames are excellent quality. They're well-made and do exactly what we need them to do. Very satisfied with this purchase.
Needed a simple and effective way to display open house signs, and these A-frames did the job perfectly. They're lightweight enough to move around easily but sturdy enough to stay put.
We've had these metal A-frames for over a year now, and they still look as good as new. They're very durable and have stood up to all kinds of weather. A great investment for our business.
These A-frames are perfect for sidewalk advertising. They're easy to set up each morning and bring in at night. They've definitely helped increase foot traffic to our store.
We use these metal A-frames to display our daily specials outside our restaurant, and they've held up great. They're sturdy enough to withstand some wind and look professional. Easy to change out the signs too.
Ideal for
Not the best fit for
Highway or roadside advertising needs a sign that reads from 100 ft or more. Custom Flags or Custom Banners cover that distance where a 24x36 in insert simply cannot.
Permanent wall-mounted interior signage calls for a flat, fixed display. Custom Signs in metal or acrylic are the right fit there.
Large-format building-facade branding sits outside the 24x36 in and 32x48 in size range. Custom Banners handle that scale without compromise.
How to choose
Use these buying points to choose the right Custom Metal A-Frame Signs configuration.
-
Frame Weight Versus Daily Portability
The angle iron frame runs roughly 15 to 20 lbs. That weight keeps it grounded in moderate wind on most sidewalks without sandbags or stakes. But if you carry the sign in and out solo every morning and evening, 20 lbs adds up fast across a week.
The Plastic Signicade frame at 10 to 13 lbs handles that daily routine more comfortably. Choose metal if the sign stays outside most of the day. Choose Signicade if portability matters more than wind resistance.
-
Insert Type for Your Content Style
Here's the thing: not every business changes its message at the same pace. Printed coroplast (UV-cured ink on rigid corrugated plastic) locks in your logo, hours, or branded menu for weeks or months without fading. Dry erase inserts (a glossy UV-cured surface that wipes clean with a dry cloth) suit daily specials you write by hand each morning.
Chalkboard inserts fit a handwritten cafe aesthetic and work the same way. Pick printed coroplast if your message stays fixed. Pick dry erase or chalkboard if it changes daily or weekly.
-
Insert Size for Your Sidewalk Location
The standard 24 x 36 in insert reads clearly from roughly 10 to 15 ft and fits most sidewalk placements without blocking foot clearance. Go with the 32 x 48 in large insert when your sign sits farther from the entrance or competes with heavy foot traffic on a busy block.
The larger face lets you run type big enough to stop a shopper mid-stride from 20 ft out. Order the size that matches your actual placement distance, not just the space available.
-
Single Location Versus Multiple Locations
One frame per address with interchangeable inserts keeps your cost down across multiple sites. Order separate frames for each location and share the same insert artwork across all of them. And if you're ordering 5 or more units, ask about bulk pricing before you check out. That one step typically brings the per-unit cost down enough to cover an extra set of inserts.
Pair it with
Brand the Glass While the A-Frame Brands the Sidewalk
Window Decals on your storefront glass give your location a complete branded look the sidewalk sign alone cannot cover. Custom Signs mounted above the entrance reinforce that at every angle. The A-frame brings people in. The decals and signs tell them they're in the right place.
FAQs
Will a Metal A-Frame Sign Stay Upright in Wind Without Tipping?
The angle iron frame weighs roughly 15 to 20 lbs, and that mass keeps it grounded in moderate wind on most sidewalk placements. It is not designed for sustained high-wind exposure or open lots without shelter. For exposed corners or gusty coastal sidewalks, position the frame so its open side faces away from the prevailing wind direction. That adjustment alone cuts tipping risk significantly.
Can I Change the Coroplast Inserts Myself Without Buying a New Frame?
Yes, and it takes about 30 seconds. The 6mm coroplast inserts slide into the frame from the top and hold in place without clips or tools. Pull the old insert out, slide the new one in, and you're done. Order replacement inserts anytime without touching the frame.
How Long Will the UV-Printed Insert Hold Up Outside Every Day?
Direct UV-printed coroplast typically lasts roughly 6 to 12 months in daily direct outdoor sun before colors start to soften. Indoors, the same insert holds its color much longer. Worth knowing: bringing the sign inside overnight extends insert life noticeably, since UV exposure accumulates during peak daylight hours. When graphics look worn, order new inserts rather than replacing the frame.
Do I See a Proof Before My Order Goes to Print?
We send a free digital proof within 24 hours of receiving your file. We do not print until you approve it. That step catches layout issues, color shifts, and text errors before ink touches the coroplast surface. Reply to the proof email with your approval or any changes, and we move into production the same cycle.
What File Types Work for the Printed Insert Artwork?
We accept PDF, PNG, JPG, and AI files. Set your file to CMYK color mode (cyan, magenta, yellow, and black combined) at 300 DPI for the sharpest result on sizes under 32 x 48 in. Include a 0.25 in bleed on all sides and keep critical text at least 0.5 in from the trim edge. The free design tool at checkout works if you're starting from scratch.
Get your artwork right
Resolution makes or breaks a sidewalk sign. We accept PDF, PNG, JPG, and AI files. AI (Adobe Illustrator vector format, which scales to any size without losing sharpness) is the best choice for logos.
- Resolution
- For photos and mixed layouts, PNG or PDF at 300 DPI (dots per inch, the measure of print sharpness) is the target. The floor is 150 DPI. Anything below that prints soft on a 24x36 in insert.
- Color mode
- Set your color mode to CMYK (cyan, magenta, yellow, and black combined), not RGB. RGB is for screens. CMYK is how we print, so your colors land closer to what you see on screen.
- Bleed and safe zone
- Build in a 0.25 in bleed (extra image area outside the trim edge that prevents white borders after cutting) on all four sides. Keep all text and logos at least 0.5 in from the trim edge inside a safe zone so nothing gets clipped.
Not ready to design? Our free online design tool lets you build your insert layout right in the browser. A professional design service is also available at checkout if you'd rather hand it off. Submit your artwork and our team sends you a free digital proof showing your graphics on the insert panel within 24 hours.
Shipping and delivery
How to Order
- Choose your frame type and insert type (printed coroplast, dry erase, or chalkboard), then upload your artwork or select a blank insert.
- We send a free digital proof within 24 hours of receiving your file, showing your graphics on the insert panel. Every order includes this proof before we print. If anything looks off, we adjust at no charge.
- Approve the proof. Your order ships within 1 to 2 business days with the frame and inserts packed together, ready to display on arrival.
Production and Shipping Timeline
Production takes 1 to 2 business days after proof approval. Orders placed before 12 PM EST enter the same production cycle that day. Frame and inserts ship together in one package, so nothing arrives separately.
Volume discounts are available for multi-location orders. Contact us before checkout to set that up.
Talk to us about your show dateOur promise
Nothing prints until you approve it.
You get a free digital proof first. If your order arrives damaged or off proof, we reprint it free. Checkout is secure and every order ships from the USA.
If your order arrives damaged or doesn't match your approved proof, we reprint and reship at no cost. That's the only outcome we accept.
A2Z Printing Hub sends a free digital proof within 24 hours of receiving your artwork, and we do not print until you approve it. Every order ships from our USA facility, so there are no customs delays or overseas hold times. Checkout runs on encrypted payment processing, and volume discounts are available for orders of 5 or more frames. Contact us before checkout and we'll set that up.
Care instructions
Metal Frame
- Wipe the angle iron frame with a damp cloth after heavy weather. The black powder coat finish resists rust and chipping, but a quick wipe keeps the surface looking sharp. Check hinges and bolts seasonally and tighten any that have worked loose.
- Store the frame folded flat indoors overnight when possible. Flat storage keeps the hinges from stressing under their own weight over time.
Coroplast Inserts
- Wipe inserts with a damp cloth and mild soap. UV-printed color holds up roughly 6 to 12 months of daily outdoor exposure before fading starts. Order replacement inserts when graphics look worn rather than replacing the frame.
- Store inserts flat to prevent warping. The angle iron frame outlasts multiple insert cycles with basic seasonal care, so your one-time frame cost keeps working long after the first insert is retired.
