Sports Decals Bestseller
Custom Sports Wall Decals
11 viewing now
SKU: AZDAS175Need it fast? Select Express Shipping at checkout
How we protect your artwork
Free proofWe send a digital proof
You approveNothing prints before that
We printOr reprint free if wrong
100% reprint guaranteeDamaged or off proof, we reprint it free.Design guidelinesPDFPhotoshopIllustratorInDesign
Product description
Custom Sports Wall Decals on 4 mil PVC, UV printed at 720 DPI. Die-cut to any shape up to 58.5…Custom Sports Wall Decals on 4 mil PVC, UV printed at 720 DPI. Die-cut to any shape up to 58.5 in. Gyms, locker rooms, fan caves. Order today.
Six steps from click to delivered booth
How to orderStep 1
Select your product
Step 2
Choose size, options and delivery
Step 3
Checkout and pay
Step 4
Upload artwork or request design help
Step 5
Approve your email proof
Step 6
We print and ship to your door
Specifications
Custom Sports Wall Decals ship on 4 mil white PVC calendar film with permanent adhesive, UV printed at 720 DPI minimum. They bond to interior and exterior walls in gyms, locker rooms, weight rooms, and fan caves. Die-cut to any shape up to 58.5 in wide, these graphics hold color through daily contact and cleaning.
- Material
- 4 mil white PVC calendar film, matte finish.A thin but sturdy vinyl sheet that conforms to flat and slightly curved wall surfaces without bubbling or lifting.
- Print Method
- UV printed, ink cured instantly by ultraviolet light.Produces a scratch-resistant, water-resistant surface that holds color through daily contact in gyms and locker rooms.
- Color Output
- CMYK full-color at 720 DPI minimum.CMYK (cyan, magenta, yellow, black) gives you accurate team colors across the full graphic.
- Finishing
- Die-cut to custom shape. Kiss-cut on backing sheet.Kiss-cut leaves the backing intact so peeling and wall placement stay controlled.
- Size Range
- Custom sizes up to 58.5 in wide.Orders wider than 58.5 in ship in multiple pieces for manual alignment on the wall.
- Indoor/Outdoor Rating
- Rated for interior and exterior walls. Water and scratch resistant.Holds up through humidity, cleaning, and daily contact typical of gym and locker room environments.
- Single/Double-Sided
- Single-sided. Adhesive back, printed face.The graphic faces outward and the adhesive bonds directly to the wall surface.
- Adhesive Type
- Permanent adhesive.Bonds to painted drywall, concrete block, and sealed surfaces. Removable with slow peeling on fully cured paint.
Features
Key highlights
- 4 Mil PVC Calendar Film With Permanent Adhesive
- UV Printing at 720 DPI Minimum on Full-Color CMYK
- Die-Cut to Any Shape Up to 58.5 In Wide
4 Mil PVC Calendar Film With Permanent Adhesive
4 mil white PVC calendar film (a thin but sturdy vinyl that conforms to flat and slightly curved wall surfaces) bonds through permanent adhesive to painted drywall, concrete block, and sealed gym walls, so your graphics stay flat and tight through daily foot traffic and humidity. Matte finish. No glare under gymnasium lighting or locker room fluorescents. A2Z Printing Hub cuts every decal from this material because it holds its edge on walls that get bumped, cleaned, and lived in daily.
UV Printing at 720 DPI Minimum on Full-Color CMYK
UV printing cures ink instantly under ultraviolet light at 720 DPI minimum, locking in scratch-resistant, water-resistant color across team logos, motivational text, and action silhouettes. The image stays crisp at close range in a locker room or weight room where athletes read it from roughly 5 ft away. Colors stay bold through repeated cleaning. And that matters on a wall that gets wiped down after every practice.
Die-Cut to Any Shape Up to 58.5 In Wide
Die-cut finishing (cutting the vinyl to the exact outline of your design rather than a standard rectangle) lets you order a player silhouette, a team crest, or a bold word mark in any shape up to 58.5 in wide. Kiss-cut on the backing sheet (meaning only the vinyl layer is cut, leaving the paper backing intact) makes peeling and positioning straightforward on site. The wall graphic reads as intentional art rather than a stuck-on rectangle. Sharp edges. Exact outlines.
Customer reviews
0.0
No customer reviews yet.
Ideal for
How to choose
Use these buying points to choose the right Custom Sports Wall Decals configuration.
-
Die-Cut Shape Versus Rectangular Format
Die-cut shapes work best for logos, mascots, and player silhouettes where the outline of the graphic carries part of the visual weight. Rectangular formats suit text-heavy motivational quotes where a clean border frames the message without competing with the letters. Upload your artwork on a transparent background and we cut around the design edges automatically.
-
Sizing for Your Viewing Distance
Here's the thing: most buyers size too small for the room. For a weight room or gym wall read from roughly 15 to 20 ft away, keep text at 4 in tall or larger and logos at 18 in or wider. For a locker room read from 5 to 8 ft, you can go tighter. Enter your viewing distance in the configurator and size up from there.
-
Matching the Adhesive to Your Wall Surface
Painted drywall and concrete block both accept the permanent adhesive cleanly. High-gloss or epoxy-coated gym walls release the cleanest when the time comes. Textured or unfinished masonry is not a good match for this product. If your wall has a rough texture, contact us before ordering so we can confirm adhesion.
-
Single Accent Piece Versus Full Wall Mural
A single accent piece works for a mascot above a doorway or a quote on one locker room wall. Full murals covering 40 in or more of wall width ship in multiple panels aligned on site. For mural orders, add 0.25 in bleed on every panel edge. And we mark the alignment guides on the backing sheet so installation stays straight without guesswork on your end.
Pair it with
Complete the Facility From Wall to Helmet
Sports wall decals brand the space. Helmet Decals brand the equipment. Both carry the same logo and color system, so nothing looks mismatched between the locker room and the field.
Take the Brand Outside the Building
Your interior walls are covered. These products extend the same graphics to the outdoor perimeter, so the facility reads as one branded environment from the parking lot inward.
Finish the Floor Beneath the Wall
A wall decal sets the tone from 4 ft up. Floor Decals with non-slip lamination carry the team logo down to court or weight room level, closing the gap between wall and floor in a fully branded room.
Cover the Table at Events and Registration
Booster nights, open houses, and team fundraisers need a branded table as much as a branded wall. Table Covers printed in the same full-color CMYK process tie the event setup to the facility look already on your walls.
FAQs
Will the Adhesive Pull Paint Off the Locker Room Wall at Removal?
The short answer: not on fully cured paint. Peel slowly from one corner, and the 4 mil PVC calendar film comes away without tearing painted drywall or concrete block. High-gloss and epoxy-coated gym walls release the cleanest. Apply mild heat from a hair dryer to any adhesive edge that resists, and the bond loosens without damaging the surface beneath.
How Long Does the Decal Hold Up Against Gym-Grade Cleaning Solution?
UV printing cures ink directly into the surface at 720 DPI minimum, so the color layer is scratch resistant and water resistant. Wipe down with a damp cloth and mild soap after practice with no visible effect on the graphic. Do not use solvent-based cleaners or bleach directly on the decal face, as those will break down the matte finish over time.
Can I Order a Decal Large Enough to Cover a Full Weight Room Accent Wall?
Yes. Our maximum single-piece width runs 58.5 in. Orders wider than that ship in multiple panels with alignment guides marked on the backing sheet for on-site installation. Plan 0.25 in bleed on every panel edge so the seams disappear once the pieces are up.
Will the Colors Match Our Exact Team Brand Colors?
We print in CMYK (the four-color process using cyan, magenta, yellow, and black) at 720 DPI minimum. Supply your artwork in CMYK color mode with your team's exact color values, and the output matches closely. Worth knowing: if your brand colors are specified in Pantone, convert them to CMYK before submitting, since our UV printers do not use Pantone ink channels.
How Fast Can I Get Sports Wall Decals Before the Season Starts?
Standard production runs 1 to 2 business days after proof approval. Orders placed before 12 PM EST go into production the same day. Most orders ship within 2 business days, so plan roughly 4 to 7 days total from order to wall depending on your location.
Get your artwork right
Resolution matters most at close range. We print at 720 DPI minimum, but your file needs to meet us halfway. Submit at 300 DPI for any graphic under 4 ft wide where athletes or visitors stand within 8 ft of the wall. Graphics read from 15 to 20 ft across a gym can come in at 150 DPI without visible softness.
We accept
PDF
PNG
JPG
AI
- Accepted formats
- PDF, PNG, JPG, AI. Vector files (AI or PDF) work best for team logos and word marks because they scale without softening.
- Color mode
- CMYK, not RGB. CMYK (the four-color printing process using cyan, magenta, yellow, and black) matches how we print, so colors on your screen translate accurately to the finished decal.
- Bleed and safe zone
- 0.25 in bleed on all sides. Keep text and logos at least 0.5 in from the cut edge.
Not ready to design? Use our free online design tool or hand the artwork off to our professional design service.
Submit your artwork on a transparent background for die-cut decals and our team sends you a free digital proof within 24 hours.
Shipping and delivery
How to Order
- Choose your size and shape. Enter custom dimensions up to 58.5 in wide, select die-cut or rectangular, and upload your artwork on a transparent background for die-cut orders.
- Approve your free digital proof. We send you the exact shape, size, and color layout before printing. If anything looks off, we adjust at no charge. Production starts within 1 business day after you approve.
- Receive your decals flat or rolled depending on size. Large wall graphics ship flat in rigid mailers with the kiss-cut backing sheet intact until you reach the wall.
Production and Shipping Timeline
Standard production runs 1 to 2 business days after proof approval. Most orders ship within 2 business days. Volume discounts for orders of 10 or more apply automatically at checkout.
Order before 12 PM EST and your decals go into production the same day. Most orders ship within 1 to 2 business days.
Talk to us about your show dateOur promise
Nothing prints until you approve it.
You get a free digital proof first. If your order arrives damaged or off proof, we reprint it free. Checkout is secure and every order ships from the USA.
Reprint guaranteeDamaged or off-proof orders are reprinted at no costSee policy
Proof firstA free digital proof before production startsSee policy
Ships from the USANo overseas transit delays on domestic ordersSee policy
Secure paymentCheckout is secure and card data is never storedSee policy
Volume pricingMulti-booth and repeat orders qualify for volume ratesSee policy
If your order arrives damaged or doesn't match your approved proof, we reprint at no cost. That guarantee covers every custom sports wall decal we ship.
Every order gets a free digital proof showing your exact shape, size, and color layout before production starts. A2Z Printing Hub ships from within the USA, so you don't wait on overseas fulfillment delays. Checkout runs on encrypted payment processing, and volume discounts apply automatically for facility and team orders covering multiple walls.
Care instructions
Product care
- Dust the decal surface weekly with a dry cloth in gym and locker room environments. Clean scuff marks or fingerprints with a damp cloth and mild soap. Do not use solvent-based cleaners or bleach directly on the matte UV-printed face.
- For removal, peel slowly from one corner on fully cured paint. Apply mild heat from a hair dryer to the adhesive edge if the decal resists. Do not apply new decals over freshly painted walls. Wait at least 30 days after painting so the paint cures fully and the adhesive bonds without lifting.
