Custom Rectangle Flags

Use these buying points to choose the right Custom Rectangle Flags configuration.

1. Single-Sided vs. Double-Sided Comes Down to Traffic Direction

   Single-sided works for most setups where foot or vehicle traffic approaches from one direction. Your design prints on the front face, and a mirror image shows through the back at roughly 80 percent opacity. That mirror image is not clean enough when people pass both faces of the flag, like a parking lot entrance with two-way traffic.

   Go double-sided and add the blockout layer (a white barrier between the two printed fabric sides) at checkout so both faces read correctly and independently.

2. Your Surface Type Determines the Base

   Choose the ground spike if you're setting up in grass, soil, or a dirt lot. For concrete, asphalt, or any hard indoor floor, the steel cross base is the right call. Pair it with a water bag (a fillable weight bag that attaches to the base and holds 15 to 20 lbs) so the flag stays anchored without drilling. Select your base type in the configurator before adding to cart.

3. Flag Height Depends on Viewing Distance

4. Sidewalk and Entrance Locations

   Heights of 6 to 10 ft clear pedestrian traffic. Good fit for restaurant entrances, retail doors, and farmers market stalls where people are already close.

5. Parking Lots and Storefronts

   Go 10 to 14 ft when vehicle traffic passes nearby. That range puts the flag above most car rooflines so drivers catch it from the road.

6. Highway-Adjacent and Large Outdoor Events

   For maximum distance visibility, 14 to 18 ft is what you need. The taller the flag, the farther it reads from moving vehicles.

7. Rectangle Shape Fits Message-Heavy Designs Best

   Rectangle is the right shape when your design includes multiple lines of text, a horizontal logo, or contact details that need a consistent top-to-bottom panel. Feather and teardrop shapes taper or curve, which cuts into usable space. If your brand mark is a single icon that reads well on a curved surface, preview both shapes in the configurator first. Upload your logo and compare before deciding.

Rectangle flags give you a uniform panel from top to bottom, so every inch of that surface needs a clean, sharp file behind it.

Accepted Formats

PDF, PNG, JPG, or AI. Vector files (AI or PDF) are best for logos because they scale without losing edge clarity.

Resolution

150 DPI is the floor. We push for 300 DPI on anything under 4 ft wide, because that's where buyers get close enough to spot a soft edge.

Bleed

0.25 in on all sides. Bleed is the extra artwork extending past the cut line so no white edges appear after trimming.

Safe Zone

Keep all text and logos at least 0.5 in from every edge. Anything closer risks getting clipped during finishing.

Color Mode

CMYK, not RGB. CMYK matches how dye sublimation printing lays down color, so what you see on screen comes out accurately on the flag fabric. RGB files can shift toward orange or cyan tones once printed.

But if you don't have a finished file, our free online design tool gives you a shape-specific template with safe zones already marked. A professional design service is also available at checkout.