Silverstep 36 Inch Retractable Banner Stands

Use these buying points to choose the right Silverstep 36 Inch Retractable Banner Stands configuration.

1. Silverstep vs. a Standard Retractable Stand

   Here's the thing: the Silverstep costs more upfront, and that gap is real. But the cassette swaps in seconds without tools, so you reorder only the graphic when your message changes. A standard retractable stand cannot do that. Silverstep typically pays for itself at the second or third graphic swap. If you change messaging twice a year or more, order the Silverstep now and budget for replacement cassettes instead of full new stands each cycle.

2. The Right Silverstep Width for Your Space

   Sizing comes down to your booth footprint and what the graphic needs to carry. The 36 in width is the right starting point for most single-stand trade show and lobby use. It fits beside a 6 ft table with room to spare and holds a full logo plus supporting copy. Go to 48 in only if your booth space is wider than roughly 10 ft and you need more graphic surface.

3. Vinyl vs. Fabric for Your Cassette Graphic

   Both materials load into the same cassette. Vinyl gives you a sharper, slightly more affordable graphic that wipes clean between events. Fabric gives you zero glare under trade show lighting and a softer look for corporate lobbies. Choose fabric if your display sits under direct overhead spotlights. Choose vinyl if portability and wipe-down maintenance matter more.

4. Floor-Standing vs. Tabletop Format

   Floor-standing is the right format if your display stands alone at booth entrances, lobby areas, or aisle sides. It extends to roughly 78 to 85 in tall, so it reads clearly from across a crowded venue floor. Go to the Silverstep 36 Inch Tabletop model only if your display sits on a table at a registration desk or check-in counter where a full-height stand would block sightlines.

Your cassette width is 36 in exactly. A 36 in graphic cassette does not fit a 48 in or 24 in base, so confirm your model before you submit your file.

Accepted Formats

PDF, PNG, JPG, AI. Vector AI files give you the sharpest logo reproduction at any scale.

Resolution

Minimum 150 DPI at final print size. For any graphic element a viewer reads from within 5 ft, 300 DPI keeps edges crisp and text tight.

Bleed

0.25 in on all sides. Content that runs to the edge needs bleed, or you risk a thin white border after trimming.

Safe Zone

Keep all text and logos at least 0.5 in inside the trim edge so nothing clips during finishing.

Color Mode

CMYK, not RGB. CMYK (the 4-color process using cyan, magenta, yellow, and black) is how we print, so colors on your screen match what comes off the press. RGB files shift in ways you won't catch until the proof.