Pop Up Displays Bestseller
Tower Pop Out Banners
10 viewing now
SKU: AZBDR015Need it fast? Select Express Shipping at checkout
How we protect your artwork
Free proofWe send a digital proof
You approveNothing prints before that
We printOr reprint free if wrong
100% reprint guaranteeDamaged or off proof, we reprint it free.Design guidelinesPDFPhotoshopIllustratorInDesign
Product description
Tower Pop Out Banners use a spring steel frame and 65g peach skin fabric for 360-degree double-sided display. Sets up…Tower Pop Out Banners use a spring steel frame and 65g peach skin fabric for 360-degree double-sided display. Sets up in under 30 seconds. Ships in 1 to 2 days.
Six steps from click to delivered booth
How to orderStep 1
Select your product
Step 2
Choose size, options and delivery
Step 3
Checkout and pay
Step 4
Upload artwork or request design help
Step 5
Approve your email proof
Step 6
We print and ship to your door
Specifications
Tower Pop Out Banners run on a spring steel frame covered in 65g peach skin fabric printed with full-color dye sublimation on both faces. The tower stands tall and narrow on any flat indoor floor surface, making it the fastest freestanding double-sided display in our lineup. Here's the thing: no other format gives you 360-degree visibility without ceiling rigging or wall support.
- Material
- 65g peach skin fabric (lightweight polyester with a soft, smooth surface texture).It holds dye sublimation ink cleanly and resists glare under indoor event lighting.
- Print Method
- Dye sublimation bonded directly into polyester fibers.Colors stay bold and crisp on both faces without cracking or peeling over repeated use.
- Color Output
- Full-color CMYK (cyan, magenta, yellow, and black combined to reproduce any color in your artwork).Every Tower Pop Out Banner we print runs full CMYK output on both sides.
- Finishing
- Spring steel frame (a coiled steel structure that pops the tower open and holds it rigid without tools).The frame collapses flat into the included carry bag after each event.
- Size Range
- Tall, narrow tower column format. Exact height and width vary by configuration.Contact us before submitting artwork to confirm your specific tower dimensions.
- Indoor/Outdoor Rating
- Indoor use only. Not rated for outdoor wind or rain exposure.Displays typically last multiple event seasons with proper storage and care.
- Single/Double-Sided
- Double-sided standard on every unit. Both faces carry your full-color artwork.Your brand reads clearly to foot traffic approaching from any direction.
- Weight
- Roughly 8 to 25 lbs depending on display size. Carry bag included with every unit.One person can carry and transport it between event locations without a cart.
Features
Key highlights
- Spring Steel Frame That Pops Open in Under 30 Seconds
- 65g Peach Skin Fabric With Dye Sublimation Printing on Both Sides
- 360-Degree Freestanding Tower Visible Above the Crowd
Spring Steel Frame That Pops Open in Under 30 Seconds
A spring steel frame forms the tower column the moment you release it from the carry bag. It's a coiled steel structure that stores tension when collapsed, so no tools and no assembly steps are needed. The frame holds its shape rigid once open. Solo exhibitors finish setup in under 30 seconds, well before the booth row fills in around them.
65g Peach Skin Fabric With Dye Sublimation Printing on Both Sides
Dye sublimation bonds ink directly into 65g peach skin fabric fibers. That's a lightweight polyester with a soft, smooth surface. Both faces of the tower carry your full-color artwork. Colors come out bold and crisp without surface glare under indoor event lighting. At A2Z Printing Hub, we print both sides in a single production run, so the quality matches face to face.
360-Degree Freestanding Tower Visible Above the Crowd
The tall, narrow tower format stands on its own floor surface without ceiling rigging or wall support. Double-sided graphics show your brand in 360 degrees, so foot traffic approaching from any direction in an aisle or entrance zone reads your message clearly. And because the display collapses flat into a carry bag (typically under 5 lbs), one person moves it between locations without a cart.
Customer reviews
3.8
★★★★★
The height of this banner makes it so easy for attendees to spot our booth from a distance. It's a great way to increase foot traffic. Setup is also relatively straightforward.
Sachin M.
★★★★★
This tower banner looks very professional and impressive. It adds a real presence to our booth and helps us to stand out from the competition. Very pleased with the overall look.
Neha V.
★★★★★
Despite its height, this tower banner is surprisingly sturdy and well-balanced. It doesn't feel like it will tip over easily, which is important in crowded environments. Good quality construction.
Aman R.
★★★★★
We use the tower banner to highlight our key messages and promotions. The height ensures that these messages are easily seen. It's a very effective way to communicate.
Swati P.
★★★★★
The tower banner provides maximum vertical impact, which is exactly what we needed for our busy trade show booth. It's tall and draws attention from across the hall. Easy to assemble.
Gaurav J.
No reviews match that rating. Select the same rating again to show all reviews.
Ideal for
Trade show aisle-end caps where the tower stands at your booth corner and pulls foot traffic from both aisle directions without shrinking your floor space.
Conference entrance markers placed just inside venue doors where attendees funnel through a single path and see your brand from both directions as they pass.
Job fairs where HR teams need a tall landmark above a packed gymnasium crowd to identify their table from roughly 40 ft away.
Retail floor repositioning where store managers carry the tower between departments daily using the included bag. No tools needed.
Product launch events in hotel ballrooms where the tower marks a demo zone perimeter without wall mounting or rigging of any kind.
Multi-event marketing teams running 3 or more shows per month who need a display one person can carry, set up, and tear down in under 2 minutes.
Corporate lobby activations where the tower stands on a flat floor and shows messaging to visitors approaching from an elevator bank or main entrance.
Not the best fit for
Outdoor events in wind or rain. The spring frame and 65g peach skin fabric are rated for indoor use only. Custom Banners with grommets handle outdoor signage instead.
Single-sided placements where only one face ever sees foot traffic. You pay for double-sided printing on both faces by default here. Retractable Banner Stands give you a single-sided option at a lower cost.
Large-format backdrop walls wider than roughly 5 ft. The tower's narrow column cannot cover that span. Backdrops (5 to 20 ft tension fabric walls) are the right choice there.
How to choose
Use these buying points to choose the right Tower Pop Out Banners configuration.
-
Tower Pop Out vs Vertical Pop Out: Matching the Format to Your Floor Plan
The Tower stands as a tall, narrow column visible above the crowd. The Vertical Pop Out is a flat, portrait-oriented panel closer to a traditional banner stand in silhouette. Both use the same 65g peach skin fabric and dye sublimation printing, but they face different directions.
The Tower shows 360-degree graphics to foot traffic approaching from any angle. The Vertical faces one direction. Choose the Tower when you're marking an entrance or aisle intersection where attendees funnel in from multiple paths. Choose the Vertical when your display faces a single lane and floor space runs tight.
-
Tower Pop Out vs Straight Fabric Pop Up Display: Speed vs Wall Coverage
Both pop open without tools, but they serve different booth shapes. The Tower pops open in under 30 seconds and works for one person anywhere on the floor. The Straight Fabric Pop Up Display covers more wall width and suits a flat backwall behind a table.
Choose the Tower when 360-degree visibility matters more than wall coverage. Go with the Straight Fabric Pop Up Display when you need a clean flat wall anchoring your booth and have roughly 1 minute for setup.
-
Tower Pop Out vs Sky Tube Hanging Banner: Floor-Standing vs Ceiling-Mounted Visibility
Sky Tube Hanging Banners mount from the ceiling and give overhead visibility across the show floor from roughly 40 ft away. The Tower stands on the floor with no ceiling attachment needed.
Choose the Tower when your venue has no rigging points, when ceiling clearance falls below 8 ft, or when you need a display that moves between locations during the event. Choose Sky Tubes when your venue allows ceiling mounting and you need aisle identification visible above the full booth row.
-
Single Tower vs Multiple Towers: Coverage for Larger Entrance or Aisle Zones
One tower works well for a single entrance point or aisle-end cap. For a wider entrance corridor or a booth with multiple approach angles, two towers at opposite ends give coverage from every direction without adding a backdrop or wall system. And when your campaign message changes, order replacement graphics separately so the same hardware carries you across events without repurchasing the spring steel frame.
Pair it with
Match the Table to the Tower
Your tower handles the vertical branding above the crowd. A branded table surface below it ties the whole setup together. Table Covers use the same dye sublimation process, so the color on your tabletop matches the tower faces exactly. Add Table Covers and Retractable Banner Stands flanking either side to bring single-sided messaging down to eye level where attendees pause.
Alternative Pop Out Shapes for Different Floor Plans
Not every floor plan calls for a tall column. Vertical Pop Out Banners cover the same aisle-side placement in a flat portrait format when 360-degree visibility isn't needed. Circle Pop Out Banners work at center-of-room placement where traffic flows from every angle and a column might interrupt sightlines.
Scale Up When the Tower Isn't Enough
One tower marks a single entrance point well. But a full booth backwall needs more width than a narrow column gives you. Backdrops (5 to 20 ft tension fabric walls) cover the full backwall behind a table or demo area. Trade Show Booths give you a complete enclosed structure when the event calls for a branded environment rather than a freestanding display.
Outdoor Pairing When the Event Moves Outside
The tower handles the indoor entrance zone. Custom Flags mark the exterior entrance with color visible from the parking lot. Custom Banners with grommets cover outdoor fence lines and facades where the spring frame is not rated to go.
FAQs
Does a Spring-Frame Tower Display Hold Its Shape at a Busy Trade Show?
The spring steel frame locks into a rigid column when popped open and stays there without any support poles or wall anchors. It does not wobble under normal foot traffic conditions on a flat indoor floor. Durability here comes from the frame material itself, not from added ballast. That said, the Tower is rated for indoor use only, so keep it off uneven outdoor surfaces where the base can rock.
Can I Collapse a Tower Pop Out Banner Alone After the Event?
Yes. Twist the frame into a figure-8 shape and fold it flat into the included carry bag. The motion takes roughly 10 to 15 seconds once you've practiced it once before your first event. We include instructions with every unit. Most solo exhibitors fold and bag the display faster than they break down a retractable banner stand.
Will the Double-Sided Graphics Match the Print Quality of a Retractable Stand?
Dye sublimation bonds full-color CMYK ink directly into the 65g peach skin fabric fibers, so the color does not sit on the surface where it can crack or peel. Both faces of the tower print with the same process and the same color depth. From 6 ft or more away, the visual quality is indistinguishable from a retractable vinyl stand. Up close, the fabric surface actually reduces glare under indoor event lighting compared to vinyl.
How Do I Get a Digital Proof Before My Order Goes to Print?
Upload your artwork at checkout. We send a free digital proof within 24 hours of receiving your file. No printing starts until you approve the proof. Orders placed before 12 PM EST enter production the same day approval comes in, so you do not lose a production day waiting on the review cycle.
Can I Replace the Fabric Graphic Without Buying a New Frame?
Yes. The 65g peach skin fabric detaches from the spring steel frame. When your campaign changes, order replacement graphics separately and fit them onto the same hardware. The frame typically outlasts multiple graphic cycles, so your cost per event drops as you reuse the hardware across shows.
Get your artwork right
Tower Pop Out Banners print on both faces, so your file needs to work from either direction. Centered logos and symmetrical layouts read correctly on the reverse face, which mirrors the front.
We accept
PDF
AI
PNG
JPG
- Accepted Formats
- PDF, AI, PNG, JPG. Vector files (AI or PDF) are preferred for logos and text because they stay sharp at any size without softening.
- Resolution
- 150 DPI minimum. For any graphic element a viewer will see closer than 4 ft, go with 300 DPI. Soft edges show up at close range and most buyers only catch them on the proof.
- Bleed
- 0.25 in on all sides. Safe zone: keep logos and text at least 0.5 in from every edge.
- Color Mode
- CMYK, not RGB. CMYK matches how we print, so the colors you see in your design file come out as expected on the fabric.
Need a file built from scratch? Our free online design tool is available at checkout. Or send us your logo and brand assets and our design team builds a print-ready file for you.
Submit your artwork as a print-ready file and our team sends you a free digital proof within 24 hours.
Shipping and delivery
How to Order
- Choose your Tower Pop Out Banner and upload artwork sized to the tower dimensions. We accept PDF, PNG, JPG, and AI files and adjust your file to fit the exact print area on both faces.
- Approve your free digital proof showing your artwork on the tower display. We send the proof within 24 hours of receiving your file. No printing starts until you approve. If anything looks off, we adjust at no charge.
- Once approved, your order goes into production and ships with the spring steel frame, printed fabric, and carry bag.
Production and Shipping Timeline
Production runs 1 to 2 business days. Orders placed before 12 PM EST enter production the same day. Tower Pop Out Banners ship flat in compact carry bags, typically under 5 lbs.
Standard ground shipping reaches most US addresses within 3 to 5 business days after production. Volume discounts apply automatically on orders of 10 or more units.
Talk to us about your show dateOur promise
Nothing prints until you approve it.
You get a free digital proof first. If your order arrives damaged or off proof, we reprint it free. Checkout is secure and every order ships from the USA.
Reprint guaranteeDamaged or off-proof orders are reprinted at no costSee policy
Proof firstA free digital proof before production startsSee policy
Ships from the USANo overseas transit delays on domestic ordersSee policy
Secure paymentCheckout is secure and card data is never storedSee policy
Volume pricingMulti-booth and repeat orders qualify for volume ratesSee policy
If your order arrives damaged or doesn't match your approved proof, we reprint at no cost. Contact us within 5 business days of delivery and include a photo of the damage.
A2Z Printing Hub sends a free digital proof within 24 hours of receiving your file. Nothing goes to press until you approve it. Checkout accepts all major credit cards and PayPal, encrypted at every step. Every Tower Pop Out Banner ships from our US facility, so your display doesn't sit in an overseas queue before it heads your way.
Care instructions
Product care
- Machine wash the 65g peach skin fabric in cold water with mild detergent when it picks up dust or surface marks between events. That's the lightweight polyester cover holding your printed graphics. Tumble dry on low. Steam out any wrinkles before your next setup so both faces look crisp under event lighting.
- After each event, twist the spring steel frame into a figure-8 shape and fold it flat into the included carry bag. Do not leave the tower popped open during storage. Sustained spring tension weakens the frame over time and shortens the number of seasons you get from the hardware.
- Wipe the frame with a dry cloth and check the edges for debris before your next pop-open. Store the carry bag away from heavy items stacked on top.
