Magnetic Signs Bestseller
Custom Reflective Magnetic Signs
5 viewing now
SKU: AZDAS184Need it fast? Select Express Shipping at checkout
How we protect your artwork
Free proofWe send a digital proof
You approveNothing prints before that
We printOr reprint free if wrong
100% reprint guaranteeDamaged or off proof, we reprint it free.Design guidelinesPDFPhotoshopIllustratorInDesign
Product description
Custom Reflective Magnetic Signs on 30 mil flexible sheet. Full-color UV print with reflective surface for night visibility. Removable, no…Custom Reflective Magnetic Signs on 30 mil flexible sheet. Full-color UV print with reflective surface for night visibility. Removable, no adhesive. Ships in 1 to 2 days.
Six steps from click to delivered booth
How to orderStep 1
Select your product
Step 2
Choose size, options and delivery
Step 3
Checkout and pay
Step 4
Upload artwork or request design help
Step 5
Approve your email proof
Step 6
We print and ship to your door
Specifications
Custom Reflective Magnetic Signs run on a 30 mil flexible magnetic sheet with a reflective surface layer bonded over the full print face. They're built for service vehicles, delivery fleets, and any night-operating truck or van that needs removable, DOT-visible branding on steel body panels.
- Material
- 30 mil flexible magnetic sheet with reflective surface layer bonded over the print face.Grips steel body panels with no adhesive and leaves no residue on removal.
- Print Method
- Direct UV print applies ink directly to the sign surface and cures it instantly with ultraviolet light.Produces a scratch-resistant, water-resistant finish that holds up to road spray and outdoor exposure.
- Color Output
- CMYK full-color output covers the full face of the sign.Bold, high-contrast designs read best because the reflective layer slightly reduces color saturation.
- Finishing
- Straight or rounded corners available.Rounded corners prevent edge lifting at highway speed and are the better choice for vehicle use.
- Size Range
- Common door-panel sizes run 12x18 in, 12x24 in, and 18x24 in. Larger formats up to roughly 24x36 in are available for truck doors and van side panels.
- Indoor/Outdoor Rating
- Rated for outdoor vehicle use. With proper weekly removal and cleaning, the magnetic backing and printed graphic typically last 2 to 3 years before noticeable fading or grip loss.
- Single/Double-Sided
- Single-sided print only.The magnetic backing occupies the reverse face, so the printed graphic faces outward when mounted.
- Weight
- Flexible and lightweight at 30 mil thickness.The sign lies flat against the vehicle surface without adding meaningful weight to the door panel.
Features
Key highlights
- Reflective Surface Layer for Night Visibility
- 30 Mil Magnetic Sheet With No Adhesive
- Full-Color UV Print That Holds Up in the Elements
Reflective Surface Layer for Night Visibility
A reflective surface layer sits over the printed graphic and bounces headlight beams back toward drivers. Your truck or van stays visible to oncoming traffic after dark without any added lighting. Most magnetic signs stop working the moment the sun goes down. This one doesn't. The reflective layer is the single feature that separates a daytime sign from one a stranded driver can read from 100 ft away at 2 a.m.
Night visibility. Built into the surface itself.
30 Mil Magnetic Sheet With No Adhesive
The 30 mil flexible magnetic sheet (roughly 0.76 mm thick) grips steel body panels firmly and peels off clean with no adhesive residue. Run it branded during work hours, then pull it off before a weekend trip. Thirty mil is thick enough to hold at highway speed and flexible enough to conform to a gently curved door panel. And because there's no adhesive involved, your paint stays exactly as you left it.
Worth knowing: rounded corners are available and prevent edge lifting at speed. That's the option we recommend for any vehicle sign.
Full-Color UV Print That Holds Up in the Elements
Direct UV print (ink cured instantly by ultraviolet light onto the sign surface) bonds to the magnetic sheet and resists rain, road spray, and sun exposure. Your colors stay bold through regular outdoor use. A2Z Printing Hub runs CMYK full-color output across the entire face of every sign. Bold, high-contrast designs read best here because the reflective surface layer slightly reduces color saturation compared to a standard magnetic sign.
Crisp text. Tough finish. Ready for the road.
Customer reviews
0.0
No customer reviews yet.
Ideal for
Tow truck operators running overnight calls who need their company name and phone number readable from 100 ft in low-light conditions.
Roadside assistance and emergency contractor fleets where DOT-visible nighttime branding is a compliance requirement, not a preference.
Electricians, plumbers, and HVAC technicians driving personal vehicles to job sites who want branding off before evening personal use.
Delivery drivers operating after dark who need a removable sign that reads clearly under streetlights without a permanent decal commitment.
Leased vehicle fleets where the lease agreement prohibits adhesive decals but consistent branding across vehicles is still needed.
Realtors and mobile service providers who want their name and number on the car during appointments and off by the time they get home.
Small business owners building a fleet identity across 2 to 10 vehicles who need matching removable signs that go on and off without a shop visit.
Not the best fit for
Vehicles with aluminum, fiberglass, or plastic body panels will not hold a magnet at all. Custom Vehicle Decals use adhesive that bonds to any smooth surface regardless of panel material.
Businesses that want branding staying on the vehicle 24 hours a day for 3 to 5 years without removal should choose Custom Vehicle Decals instead. That's the right product for permanent commitment.
Tight-radius curved surfaces like bumpers cannot lie flat against the magnetic sheet. Custom Vehicle Decals conform to those curves with adhesive backing.
How to choose
Use these buying points to choose the right Custom Reflective Magnetic Signs configuration.
-
Night Visibility Need Versus Standard Daytime Branding
The reflective surface layer is the only difference between this product and a standard magnetic sign. But that difference matters a lot if your vehicle runs calls after dark. Order these when your truck, van, or service vehicle is on the road after sunset more than a few nights a week. Tow trucks, roadside assistance crews, and overnight delivery drivers all fall into this group.
Daytime-only vehicles in your fleet don't need the reflective layer. Custom Magnetic Vehicle Signs cost less per unit for those.
-
Removable Magnetic Sign Versus Permanent Adhesive Decal
Choose a magnetic sign when branding comes off at the end of the workday: a personal vehicle, a leased fleet unit, or any situation where the sign needs to disappear before evening. The 30 mil sheet lasts roughly 2 to 3 years with weekly removal and cleaning.
Choose Custom Vehicle Decals when the branding stays on permanently and the vehicle panel is not steel. Adhesive vinyl bonds to aluminum, fiberglass, and plastic surfaces where a magnet won't grip. Adhesive decals rate 3 to 5 years outdoors without any removal routine.
-
Vehicle Panel Material and Surface Compatibility
Test your vehicle door with a refrigerator magnet before ordering. If it holds firmly, the 30 mil sheet grips the same surface. Aluminum-body vehicles (certain Ford F-150 trims, Tesla models, and several luxury brands) and fiberglass panels will not hold a magnet. For those surfaces, Custom Vehicle Decals are the correct product.
-
Single Vehicle Versus Fleet Order Sizing
A 12x18 in or 18x24 in sign covers most car and truck door panels cleanly. For van side panels, go up to 24x36 in to fill the larger flat surface. Fleet orders of 10 or more signs qualify for volume pricing, and matching pairs (left door plus right door) ship together in the same flat mailer.
Pair it with
Permanent Vehicle Branding When the Magnet Won't Work
Some body panels are aluminum, fiberglass, or plastic and will not hold a magnet. Custom Vehicle Decals use adhesive vinyl rated 3 to 5 years outdoors and bond to any smooth surface, so your fleet stays branded regardless of panel material.
Standard Magnetic Signs for Daytime-Only Vehicles
Not every vehicle in your fleet runs after dark. Custom Magnetic Vehicle Signs use the same 30 mil sheet without the reflective layer, so daytime vehicles get matching removable branding at a lower per-unit cost.
Storefront and Job Site Signs That Match Your Doors
Your vehicle carries the brand to the job. Business Signs and A-Frame Signs carry the same logo, phone number, and colors from your truck door to your job site entrance or storefront window.
Broader Brand Presence Beyond the Vehicle
Custom Banners cover storefronts and event backdrops. Custom Flags pull eyes from the road at outdoor locations. Both extend the same brand identity your reflective magnetic signs carry on the road.
FAQs
Get your artwork right
Resolution determines how sharp your phone number and logo read from across a lane of traffic. Submit files at 300 DPI (dots per inch, the measure of print detail) for any sign under 24 in wide. 150 DPI is the floor, but thinner fonts lose legibility at that setting.
We accept
PDF
PNG
JPG
AI
- Accepted formats
- PDF, PNG, JPG, AI. Vector files (AI or PDF) work best for logos because they scale without softening.
- Bleed
- 0.25 in on all sides. Keeps the background color running to the cut edge cleanly.
- Safe zone
- Keep text and logos at least 0.5 in from all edges. Rounded corner cuts trim into that margin.
- Color mode
- CMYK, not RGB. CMYK matches how we print, so the colors you see on screen match what comes off the press. Also worth knowing: the reflective surface layer slightly reduces color saturation, so bold text and high-contrast color combinations read best at night.
Use our free online design tool at checkout, or request our professional design service if you need a layout built from scratch. Upload your sign artwork and our team sends you a free digital proof showing the exact print layout and corner style within 24 hours.
Shipping and delivery
How to Order
- 1. Pick your size and corner style, then upload your design file or use the free online tool at checkout. 2. Approve your free digital proof showing the exact layout, colors, and corner cut before production starts. 3. Once you approve the proof, production starts within 1 business day and your signs ship flat in a rigid mailer to prevent curl.
- Every order includes a free digital proof before we print. If anything looks off, we adjust at no charge.
Production and Shipping Timeline
Standard production runs 1 to 2 business days after proof approval. Fleet orders of 10 or more signs may add 1 to 2 production days. All magnetic signs ship flat, not rolled, to prevent permanent curl in the magnetic sheet.
Matching door pairs (left plus right) ship together in the same flat mailer. Volume discounts apply automatically for orders of 10 or more.
Order before 12 PM EST and your signs go into production the same day. Bulk orders of 10 or more qualify for volume pricing.
Talk to us about your show dateOur promise
Nothing prints until you approve it.
You get a free digital proof first. If your order arrives damaged or off proof, we reprint it free. Checkout is secure and every order ships from the USA.
Reprint guaranteeDamaged or off-proof orders are reprinted at no costSee policy
Proof firstA free digital proof before production startsSee policy
Ships from the USANo overseas transit delays on domestic ordersSee policy
Secure paymentCheckout is secure and card data is never storedSee policy
Volume pricingMulti-booth and repeat orders qualify for volume ratesSee policy
If your order arrives damaged or doesn't match your approved proof, we reprint at no cost. That's not a footnote. It's how we operate on every single order.
Every order gets a free digital proof before we print. Production does not start until you approve the exact layout, colors, and corner style. A2Z Printing Hub ships all orders flat from our USA facility, so your signs arrive ready to mount without curl. Checkout uses encrypted payment processing on every transaction.
Care instructions
Product care
- Remove the sign from the vehicle at least once a week. Wipe both the magnetic backing and the vehicle surface with a damp cloth to clear any trapped dirt or grit. Grit between the sign and the panel is what causes paint scratches, not the magnet itself. Clean the print face monthly with mild soap and water, and check the corners for any curling.
- Store the sign flat on a steel surface like a file cabinet or between two flat boards. Do not roll or fold it. Rolling causes permanent curl that weakens grip on the door panel.
- Always remove the sign before an automatic car wash. Rotating brushes catch the edges and can tear the sign off at speed.
