Custom Perforated Window Decals​

Use these buying points to choose the right Custom Perforated Window Decals​ configuration.

1. Storefront Window vs Vehicle Rear Window Placement

   Your placement sets the sizing floor. For storefront windows, order up to 58.5 in wide and use bold text at least 3 in tall. That keeps the message readable from the sidewalk at roughly 20 to 30 ft away. For vehicle rear windows, measure the glass panel itself and confirm your die-cut shape fits within the window frame before uploading your file. A shape that bleeds onto the trim won't sit flat.

2. Full-Window Coverage vs Partial Graphic Placement

   Full-window coverage works best when your artwork uses large shapes and solid color blocks. The 30% open holes reduce effective ink density. A design built on thin gradients or small detail will look softer than it does on screen. Partial placement on the lower third or a corner panel is a good starting point if you want to test street visibility before committing to full coverage.

3. Permanent Decal vs Removable Cling for the Same Glass

   Here's the thing: perforated window decals use permanent adhesive and are not designed for repeated removal. If you swap your window graphics more than once or twice a year, Window Clings are the better choice. They use no adhesive and peel off without residue every time, so seasonal rotations do not need a heat gun.

4. Bold Large-Format Graphics vs Fine Detail Artwork

   Sizing options matter most here. Stick to block lettering and solid shapes for the clearest read from the street. The 30% perforation ratio means thin fonts under roughly 1 in tall and hairline detail artwork will not hold their edges at print size. Bold colors and large text are the right call on this material every time.

Accepted file formats are PDF, PNG, JPG, and AI. Vector files (AI or PDF) work best for logos because they scale without losing edge sharpness.

Resolution

Resolution runs a minimum of 150 DPI at final print size. We recommend 300 DPI for anything under 4 ft wide, where viewers get close enough to catch a soft edge. Include 0.25 in bleed on all sides and keep critical text and logos at least 0.5 in from the cut line.

Color mode

Submit your artwork in CMYK color mode (the four-color process our press uses). RGB files shift color on output, so converting to CMYK before upload keeps your colors accurate.

Artwork setup

Worth knowing: the 30% open holes in perforated vinyl reduce effective ink density at street distance. Use bold fonts, solid color blocks, and text at least 3 in tall. Thin lines under roughly 1 in and fine-detail artwork will not read clearly. For die-cut shapes, supply your artwork on a transparent background so we cut to the design edge exactly.