Micro GeoMetrix Tabletop Displays Bestseller
1x3 Micro GeoMetrix Tabletop Display
6 viewing now
SKU: AZBDR038Need it fast? Select Express Shipping at checkout
How we protect your artwork
Free proofWe send a digital proof
You approveNothing prints before that
We printOr reprint free if wrong
100% reprint guaranteeDamaged or off proof, we reprint it free.Design guidelinesPDFPhotoshopIllustratorInDesign
Product description
1x3 Micro GeoMetrix Tabletop Display on 240g elastic polyester with aluminum frame. Dye sublimation printing. Sets up in under 5…1x3 Micro GeoMetrix Tabletop Display on 240g elastic polyester with aluminum frame. Dye sublimation printing. Sets up in under 5 minutes. Ships in 1 to 2 days.
Six steps from click to delivered booth
How to orderStep 1
Select your product
Step 2
Choose size, options and delivery
Step 3
Checkout and pay
Step 4
Upload artwork or request design help
Step 5
Approve your email proof
Step 6
We print and ship to your door
Specifications
The 1x3 Micro GeoMetrix Tabletop Display runs on a 240g elastic polyester fabric panel system attached magnetically to an aluminum pop-up grid frame. One panel wide by three panels tall, it sits at the end of a 4 ft, 6 ft, or 8 ft table. Setup takes under 5 minutes without tools.
- Material
- 240g elastic polyester fabric.Thick, stretch-resistant fabric holds taut on the frame and resists creasing during transport and storage.
- Print Method
- Dye sublimation.Ink converts to a gas under heat and bonds into the polyester fibers, so colors stay sharp and do not peel.
- Color Output
- Full-color CMYK.All four ink channels print on every order, so gradients, photography, and multi-color logos reproduce accurately.
- Finishing
- Magnetic panel attachment with aluminum pop-up grid frame.Panels snap onto sewn-in magnetic edge strips and remove just as easily for replacement or washing.
- Configuration
- 1x3 grid. One panel wide by three panels tall.Narrow vertical column sized for end-of-table placement on 4 ft, 6 ft, or 8 ft tables.
- Indoor/Outdoor Rating
- Indoor use only.Typical indoor display life runs well beyond 12 months with proper storage between events.
- Panel Attachment
- Magnetic panel system. No clips, no velcro, no tools needed.Panels align and attach in seconds along the frame edges.
- Portability
- Carry bag included. Lightest configuration in the Micro GeoMetrix line.The aluminum frame collapses flat and panels stack inside the same bag.
Features
Key highlights
- 240g Elastic Polyester Panels That Snap On Magnetically
- Aluminum Pop-Up Grid Frame Built for Repeated Use
- Narrow 1x3 Configuration Sized for End-of-Table Placement
240g Elastic Polyester Panels That Snap On Magnetically
Each graphic panel prints on 240g elastic polyester (a thick, stretch-resistant fabric that holds taut on the frame without surface creasing). Magnetic strips sewn into the panel edges let you snap graphics onto the aluminum grid and pull them off just as fast. Swap messaging between events without buying new hardware. A2Z Printing Hub prints every panel using dye sublimation, so colors bond directly into the fibers and stay crisp through repeated attachment and removal cycles. Sharp graphics. Reusable frame.
Aluminum Pop-Up Grid Frame Built for Repeated Use
The aluminum grid frame pops open and locks flat on any table surface without tools. Collapse it back into the included carry bag in roughly 2 minutes. And because the frame is aluminum, not plastic, it holds its shape across dozens of events without bending at the joints. Worth knowing: the carry bag holds both the collapsed frame and stacked panels together, so nothing ships separately or gets left behind.
Narrow 1x3 Configuration Sized for End-of-Table Placement
The 1x3 runs one panel wide by three panels tall. That gives you a tall, slim branded column at the end of a 6 ft or 8 ft table, leaving the center open for product samples or printed materials. Tabletop booth rules at most shows do not allow floor-standing displays. This configuration works within those rules and still gives you vertical branded height that reads from across the aisle. Tall. Slim. Built for tight table spaces.
Customer reviews
4.2
★★★★★
The narrow format is good for focused messaging or displaying a series of related graphics.
Cody M.
★★★★★
The pop-up mechanism is simple and allows for quick setup.
Grace R.
★★★★★
It feels stable on the tabletop once set up.
Abigail S.
★★★★★
It's very easy to transport and fits comfortably in a small carrying case.
Samuel P.
★★★★★
This 1x3 grid tabletop display is compact yet effective for showcasing key information at our table.
Olivia W.
No reviews match that rating. Select the same rating again to show all reviews.
Ideal for
Trade show tabletop-only booth spaces where show floor rules do not allow floor-standing displays and every inch of table surface counts.
Conference registration desks where a tall, slim display at one end brands the space without blocking staff or attendee flow.
Sales presentations at client offices: fits in a carry bag, sets up on a conference table in under 5 minutes.
Pharmaceutical and medical rep presentations in clinic waiting rooms where counter space is tight and a narrow vertical display fits beside brochure holders.
Pairing two 1x3 units on opposite ends of a 6 ft or 8 ft table with product samples displayed in between.
Retail counter displays for product launches where the narrow footprint sits beside a register without blocking customer sight lines.
Recruitment and HR teams at college job fairs where tabletop-only booth assignments are standard and a tall display draws attention from across the aisle.
Not the best fit for
Floor-standing height above table level is not this display's job. Retractable Banner Stands handle that.
A large backdrop behind a stage or full booth backwall needs width this configuration cannot cover. Backdrops in the 5 ft to 20 ft range are the right call there.
Outdoor use in wind or rain will damage the 240g elastic polyester panels and magnetic attachment system. Custom Banners on PVC Flex vinyl with grommets are built for that environment.
How to choose
Use these buying points to choose the right 1x3 Micro GeoMetrix Tabletop Display configuration.
-
Rectangular Grid, X-Frame, or Triangular Shape
Rectangular grids like the 1x3 work best when you want a backdrop-style column behind your table materials. X-frames suit center-of-table placement where traffic approaches from multiple angles. Triangular configurations give you 3-directional visibility on reception counters. Start with rectangular if you're new to the system.
-
Which Rectangular Grid Size Fits Your Table
-
Narrow end-of-table placement
The 1x3 fits any table from 4 ft up. It works best at the end of a 6 ft or 8 ft table, leaving the center open for product samples or printed materials. Don't go wider than your table: the display shouldn't overhang the edge.
-
Wider backdrop coverage
The 2x2 suits small square tables. The 2x3 fills a 6 ft table backdrop. And the 3x3 covers an 8 ft table at full width. Match the grid width to your table so nothing overhangs.
-
The 1x3 Micro GeoMetrix vs a Flat Single-Panel Tabletop Stand
Here's the thing: these two products solve different problems. The 1x3 creates a tall, structured 3D column with magnetic swappable panels on 240g elastic polyester. A Silverstep tabletop retractable stand is a flat single-panel pull-up that sets up in roughly 30 seconds. Choose the 1x3 when you want a taller, more structured branded presence. Choose the retractable when a single flat panel is enough and speed of setup is the top priority.
-
Single 1x3 Unit vs Two Units on One Table
One 1x3 unit at a single end works for most tabletop booth setups. Two units at opposite ends of a 6 ft or 8 ft table frame the product display in the center and double your branded surface without adding any floor footprint. Order two units if your table is 6 ft or longer and you want a fully framed look.
Pair it with
Brand the Table Surface Under the Display
The 1x3 handles vertical branding at the end of the table. A branded Table Cover wraps the remaining surface in the same colors and logo. The full setup reads as one cohesive display rather than a stand sitting on a bare folding table.
Larger Rectangular Grid Sizes
Your table size or branding goals may call for more surface. The 2x2 suits small square tables with a balanced footprint, the 2x3 fills a 6 ft table backdrop, and the 3x3 covers an 8 ft table at full width.
Flat Single-Panel Tabletop Alternative
A 3D structure is more than some setups need. Silverstep Retractable Banner Stands include a tabletop model that pulls up in roughly 30 seconds as a flat single panel.
When Tabletop-Only Is No Longer Enough
Bigger shows call for floor-level and full-booth solutions. Retractable Banner Stands add messaging beside the table, and Trade Show Booths cover the full booth environment when you move beyond a tabletop assignment.
FAQs
How Does the Magnetic Panel System Hold the Graphic in Place During a Busy Event?
Magnetic strips are sewn directly into the edges of each 240g elastic polyester panel. Those strips snap to the aluminum grid frame along its full perimeter, so the panel doesn't rely on a single clip or latch point. The contact runs the length of each edge, which keeps the graphic flat and taut even when people brush past the table. It's a firm hold, not a light surface attraction.
Can One Person Set Up the 1x3 Micro GeoMetrix Tabletop Display Without Help?
Yes. Pop the aluminum grid frame open on the table surface, then attach each magnetic panel along the frame edges. The whole process typically takes under 5 minutes solo. But if you're setting up multiple units at once, a second person speeds things up.
Will the 1x3 Tip Over on a Table If Someone Bumps It?
The aluminum pop-up grid frame locks into shape and sits flat on any table surface. It is not a tall single-pole structure, so the base contact is wider and more stable than a retractable stand. That said, place it on a flat, level table for best results. An uneven surface is the most common reason a tabletop display shifts during an event.
Can I Order Replacement Graphic Panels Later Without Buying a New Frame?
Yes, and that's one of the strongest reasons to choose this system. The aluminum frame is reusable across every future event. Order replacement magnetic panels when your messaging changes or when you're running a second event with different branding. Panels are configuration-specific, so order replacements sized for the 1x3 frame.
Does the 1x3 Micro GeoMetrix Tabletop Display Ship as a Complete Kit?
Every order ships with the aluminum grid frame, printed magnetic panels, and carry bag. You do not need to source hardware separately. Replacement panel orders ship lighter since no frame is included, which also lowers shipping cost on reorders.
Get your artwork right
The 1x3 Micro GeoMetrix Tabletop Display prints across three separate panels. Each panel is an individual printed piece, not one continuous graphic, so design decisions here are different from designing a single flat banner.
Here's the thing about this product specifically: do not place logos or key text across panel seams. The magnetic gap between panels breaks any visual that spans two pieces. Keep all critical content centered within individual panel boundaries.
We accept
PDF
PNG
JPG
AI
- File Formats
- PDF, PNG, JPG, or AI. Vector AI files work best for logos because they scale without softening.
- Resolution
- 150 DPI minimum. 300 DPI recommended for anything with small text or fine detail, because that is where soft edges show up first.
- Bleed
- 0.25 in on all sides of each panel. **Safe Zone:** keep logos and text 0.5 in from every panel edge.
- Color Mode
- CMYK, not RGB. CMYK matches how we print, so colors on screen come out as expected on the finished panels.
Our free online design tool includes 1x3 panel templates sized to the exact configuration. A professional design service is also available if you want a designer to build the layout for you.
Submit your artwork as a print-ready file and our team sends you a free digital proof within 24 hours.
Shipping and delivery
How to Order
- Choose the 1x3 configuration and upload your artwork sized to the individual panel dimensions. We accept PDF, PNG, JPG, and AI files.
- Review your free digital proof showing artwork on each panel of the 1x3 frame. If anything looks off, we adjust at no charge before you approve.
- Your complete kit ships once production is done. Every kit includes the aluminum grid frame, printed magnetic panels, and carry bag.
Production and Shipping Timeline
Production runs 1 to 2 business days. Orders placed before 12 PM EST enter production the same day. Replacement panel orders ship lighter since no hardware is included, so turnaround on those is typically on the shorter end of that window.
And if you are ordering for a team: volume discounts apply to orders of 10 or more units, which suits sales teams outfitting multiple reps with matching displays.
Order before 12 PM EST and your display goes into production the same day.
Talk to us about your show dateOur promise
Nothing prints until you approve it.
You get a free digital proof first. If your order arrives damaged or off proof, we reprint it free. Checkout is secure and every order ships from the USA.
Reprint guaranteeDamaged or off-proof orders are reprinted at no costSee policy
Proof firstA free digital proof before production startsSee policy
Ships from the USANo overseas transit delays on domestic ordersSee policy
Secure paymentCheckout is secure and card data is never storedSee policy
Volume pricingMulti-booth and repeat orders qualify for volume ratesSee policy
If your order arrives damaged or does not match your approved proof, we reprint at no cost. That is not a conditional offer. It covers every order we ship.
Every order at A2Z Printing Hub starts with a free digital proof showing your artwork on each panel before we print anything. Checkout uses standard US payment methods, and no account is needed to place an order. Your complete kit ships from our US facility, so there are no overseas freight delays and no guessing about where your package is.
Care instructions
Magnetic Panels (240g Elastic Polyester)
- Remove panels from the frame after each event. Machine wash cold with mild detergent if needed, then tumble dry low. The magnetic strips are sewn into the panel edges and survive washing without losing hold. Do not iron over the magnetic strip areas.
Aluminum Grid Frame
- Collapse the frame fully after use and wipe with a dry cloth. Check the pop-up joints for smooth operation. If joints feel stiff, apply a small drop of silicone lubricant. Store the collapsed frame in the included carry bag.
Transport and Storage
- Panels stack flat inside the carry bag alongside the frame. The 1x3 is the lightest configuration in the Micro GeoMetrix line, so the full kit travels easily in a standard carry-on or checked bag. Between events, keep the bag upright in a dry indoor space and do not stack heavy items on top.
