Standard Table Covers Bestseller
4-Sided Table Covers
7 viewing now
SKU: AZTCST04Need it fast? Select Express Shipping at checkout
How we protect your artwork
Free proofWe send a digital proof
You approveNothing prints before that
We printOr reprint free if wrong
100% reprint guaranteeDamaged or off proof, we reprint it free.Design guidelinesPDFPhotoshopIllustratorInDesign
Product description
4-Sided Table Covers in 4 ft, 6 ft, and 8 ft sizes. 8.8 oz fabric, dye sublimation print, 300 DPI.…4-Sided Table Covers in 4 ft, 6 ft, and 8 ft sizes. 8.8 oz fabric, dye sublimation print, 300 DPI. Hides everything underneath. Machine washable. Ships in 2 to 4 days.
Six steps from click to delivered booth
How to orderStep 1
Select your product
Step 2
Choose size, options and delivery
Step 3
Checkout and pay
Step 4
Upload artwork or request design help
Step 5
Approve your email proof
Step 6
We print and ship to your door
Specifications
4-Sided Table Covers run on 8.8 oz tension fabric, a smooth woven polyester that drapes flat to the floor on all four sides. This is the cover built for center-room tables where every angle faces an attendee. Here's the thing: the fabric weight, the print method, and the size options all work together to give you a fully enclosed setup that travels light and sets up fast.
- Material
- 8.8 oz tension fabric (smooth, medium-weight woven polyester). Hangs flat to the floor without bunching. Machine washable cold, tumble dry low.
- Print Method
- Dye sublimation, where ink converts to a gas under heat and bonds permanently into the fabric fibers. The print cannot crack, peel, or wash off.
- Color Output
- CMYK full-color at 300 DPI across all covered panels. CMYK (cyan, magenta, yellow, black) reproduces any logo color or photographic graphic accurately.
- Finishing
- Hemmed edges on all panels for a clean border. Fitted corners hold the cover in place on the table.
- Size Range
- Available for standard 4 ft, 6 ft, and 8 ft rectangular folding tables. Each cover is cut to fit that specific table length.
- Indoor/Outdoor Rating
- Suited for indoor use and light outdoor use such as shaded vendor booths. Not rated for heavy rain or sustained wind without shelter overhead.
- Coverage Style
- Open-back style (front and two side panels plus open rear) or closed-back style (all four sides fully enclosed). Select at checkout.
- Weight
- Roughly 2 to 4 lbs depending on table size. Folds flat into a carry bag for transport between events.
Features
Key highlights
- 8.8 oz Tension Fabric With Full 360-Degree Floor-Length Coverage
- Dye Sublimation Printing at 300 DPI Across All Four Panels
- Open-Back or Closed-Back Style on 4 ft, 6 ft, and 8 ft Tables
8.8 oz Tension Fabric With Full 360-Degree Floor-Length Coverage
Eight-point-eight ounce tension fabric (a smooth, medium-weight woven polyester) forms every panel on this cover. All four sides drop to the floor, so attendees approaching from any direction see a clean, finished surface with nothing visible underneath. That weight matters: lighter fabrics bunch at the corners, while 8.8 oz hangs flat and stays there. Setup takes seconds. Drape the cover over the table, smooth it with your hands, and it's ready.
Dye Sublimation Printing at 300 DPI Across All Four Panels
Dye sublimation runs at 300 DPI across every covered panel. The process heats ink into a gas that bonds directly into the fabric fibers, so it cannot crack or peel. Your logo and graphics stay sharp and readable from across a 10 ft booth aisle. At A2Z Printing Hub, every order runs through a free digital proof so you see your graphics on each panel before production starts. Color holds through 50 or more machine washes without fading.
Open-Back or Closed-Back Style on 4 ft, 6 ft, and 8 ft Tables
You choose open-back style for easy seating access or closed-back for complete 360-degree coverage. Both options fit standard 4 ft, 6 ft, and 8 ft folding tables right out of the bag. No hardware. No tools. But the real value here is flexibility: one style works against a booth wall, the other works center-room where every side faces foot traffic.
Customer reviews
4.0
★★★★★
They're easy to wash, which is great for reusing them at multiple events.
Justin W.
★★★★★
The fabric seems durable enough for regular use.
Nicole K.
★★★★★
Perfect for concealing any storage boxes or items we have under the tables
Eric M.
★★★★★
They help create a clean and uniform appearance across all our tables at events.
Ashley P.
★★★★★
These 4-sided table covers provide complete coverage and give a really professional look to our display tables.
Brian S.
No reviews match that rating. Select the same rating again to show all reviews.
Ideal for
Registration islands at conferences where attendees approach from all four sides and the area underneath needs to stay hidden.
Center-of-room display tables at trade shows where your booth has no back wall and every side faces foot traffic.
Job fair and recruiting tables where a branded front, two sides, and a covered back give the setup a finished look from every direction.
Product sampling and demo stations where staff works behind a freestanding table in an open floor plan.
Outdoor vendor booths at farmers markets and craft fairs where a fully enclosed cover keeps supplies and bags out of sight.
School, church, and nonprofit fundraiser tables positioned in the middle of a gymnasium where guests walk the full perimeter.
Corporate open house and lobby tables sitting away from any wall and needing consistent branding on all visible sides.
Outdoor festival merchandise tables where a fully enclosed cover hides inventory boxes stored underneath between customer rushes.
Not the best fit for
Buyers who want a tailored, snug fit that hugs the table corners rather than draping loosely will get a cleaner result from **Fitted Table Covers**.
Buyers who want a sleek, skin-tight finish with zero fabric pooling at the base should choose **Stretch Table Covers** instead.
Buyers who need to reach items stored under the table frequently during an event will find the **4-Sided Table Covers With Zipper** more practical.
How to choose
Use these buying points to choose the right 4-Sided Table Covers configuration.
-
Open-Back or Closed-Back Coverage
Here's the thing: where your table sits tells you which style to pick. If the table sits against a booth backwall or a room wall, open-back gives staff easy chair and storage access with no visible gap from the audience side. But if your table sits in the middle of a room with attendees walking all four sides, closed-back is the only choice that keeps every angle clean. Pick your style at checkout before uploading your design.
-
Matching the Cover to Your Table Size
Measure your table before ordering. Standard folding tables come in three lengths: 4 ft for tight spaces and small vendor setups, 6 ft for most events, and 8 ft for large booths and long display runs. A 6 ft cover does not fit an 8 ft table. Confirm your table length first, then select that size at checkout. The cover is cut specifically for that dimension.
-
Standard Drape, Fitted, or Stretch
Standard drape fits a range of tables within its size category and sets up by dropping the cover over the table and smoothing flat. Fitted Table Covers hug the corners for a more structured look but must match the table size exactly. Stretch Table Covers wrap tight like a fitted sheet for a sleek finish. Start with standard if you use the same table at multiple events and want the simplest setup possible.
-
Full Enclosure or Zipper Access
The closed-back cover gives complete coverage from every angle. Honest trade-off: reaching items stored underneath means lifting the back panel. The 4-Sided Table Cover With Zipper adds a rear zipper so staff can access boxes and supplies without disturbing the cover. Choose the zipper version if your table is center-room and staff needs under-table access during the event.
Pair it with
Add Vertical Branding Above the Table
Your table cover handles the floor-level display. A Retractable Banner Stand placed directly behind the table adds a second branded surface at eye level, roughly 6 to 7 ft tall. Your messaging reaches attendees from two heights at once. Custom Flags flanking both sides pull eyes toward the table from 25 to 35 ft away.
Layer a Second Brand Element on Top
A Table Runner lays centered across the top of your cover and adds a second logo placement without replacing the full-color drape underneath. Tabletop Displays sit on the surface and give product samples or printed materials a structured, visible home.
Cover the Table Differently
Fitted Table Covers hug the corners for a structured, tailored look on the same 4 ft, 6 ft, and 8 ft tables. Stretch Table Covers wrap tight in a spandex blend for a smooth, wrinkle-free finish. The 4-Sided Table Cover With Zipper gives the same full 360-degree coverage as this cover plus a rear zipper for staff access during the event.
Shelter the Whole Setup Outdoors
A Custom Canopy Tent covers the table and your staff at outdoor vendor booths and farmers markets. Pair it with this cover and the tent handles overhead shelter while the cover handles the four-sided ground display.
FAQs
Get your artwork right
File format matters before anything else. Submit your design as PDF, AI, PNG, or JPG. AI (Adobe Illustrator vector format) is the strongest choice for logos because vector files scale to any panel size without losing edge sharpness.
We accept
PDF
PNG
JPG
AI
- Resolution
- 300 DPI at final print size. Files below 150 DPI will look soft on the front panel, where most attendees get closest to the table.
- Bleed
- 0.25 in on every panel edge. Bleed is the extra image area beyond the cut line that prevents a white border from appearing on the finished cover.
- Safe zone
- Keep all text and logos at least 0.5 in from each panel border. Anything inside that margin risks getting trimmed or folded under at the hem.
- Color mode
- Submit files in CMYK, not RGB. CMYK is the four-ink process our printers use. RGB files convert on output and colors can shift in ways that are hard to predict, particularly with deep reds and navy blues.
Worth knowing: our free online design tool includes panel templates sized per coverage type (open-back and closed-back). Place your logo on the front, sides, and back panels separately and see how each one lays out. Need help arranging graphics across all four panels? Our professional design service handles the layout for you.
Submit your table cover logo and our team sends you a free digital proof showing your branding on each printed panel.
Shipping and delivery
Order within — to qualify for Next-Day Delivery.Orders placed after 2:30 PM PST begin a 24-hour processing period from the time the order is placed.
Production runs 2 to 4 business days after proof approval.
How to Order
- Choose your table size (4 ft, 6 ft, or 8 ft) and your coverage style (open-back or closed-back). Then upload your design file in PDF, PNG, JPG, or AI format.
- Review your free digital proof showing your graphics on each printed panel. Approve the proof or request changes. If anything looks off, we adjust at no charge. Production starts within 1 to 2 business days of your approval.
- Your cover ships folded flat in a poly bag inside a box. Lightweight fabric shipping keeps delivery costs low across all three table sizes.
Production and Shipping Timeline
Production runs 2 to 4 business days after proof approval. Standard shipping adds 2 to 5 business days depending on your location. Bulk orders of 10 or more covers qualify for volume discounts. The configurator shows your exact price, including any volume reduction, before you check out.
Order before 12 PM EST and your table cover goes into production the same day.
Talk to us about your show dateOur promise
Nothing prints until you approve it.
You get a free digital proof first. If your order arrives damaged or off proof, we reprint it free. Checkout is secure and every order ships from the USA.
Reprint guaranteeDamaged or off-proof orders are reprinted at no costSee policy
Proof firstA free digital proof before production startsSee policy
Ships from the USANo overseas transit delays on domestic ordersSee policy
Secure paymentCheckout is secure and card data is never storedSee policy
Volume pricingMulti-booth and repeat orders qualify for volume ratesSee policy
If your order arrives damaged or doesn't match your approved proof, we reprint at no cost. No forms, no waiting, no argument.
Every order starts with a free digital proof showing your graphics on each printed panel. You approve it before production starts. A2Z Printing Hub ships every cover from our USA facility, so you won't deal with overseas delays or customs holds. Payments process through secure, encrypted checkout and your billing data is never stored on our servers.
Care instructions
Product care
- Machine wash cold with mild detergent and tumble dry on low heat. Do not bleach. The dye sublimation print bonds directly into the 8.8 oz fabric fibers, so it holds color through 50 or more washes without fading or cracking.
- If wrinkles appear after washing, iron on low heat on the reverse side only. Do not press a hot iron directly onto the printed surface.
- Fold loosely for storage and transport. Tight compression creates deep creases that take longer to relax. A loose fold or a hanger in a closet lets gravity pull wrinkles flat over time.
- At the event, drape the cover over the table and smooth flat with your hands. Most fold creases pull out within 10 to 15 minutes on the table. A handheld steamer clears stubborn wrinkles in under 2 minutes.
