Magnetic Modular Fabric Display Bestseller
6.5 ft x 6.5 ft X-Shape Magnetic Modular Fabric Display
3 viewing now
SKU: A2ZMG005Need it fast? Select Express Shipping at checkout
How we protect your artwork
Free proofWe send a digital proof
You approveNothing prints before that
We printOr reprint free if wrong
100% reprint guaranteeDamaged or off proof, we reprint it free.Design guidelinesPDFPhotoshopIllustratorInDesign
Product description
6.5 ft x 6.5 ft X-Shape Magnetic Modular Fabric Display. 240g flame-retardant tension fabric, dye sublimation, double-sided. Tool-free magnetic assembly.…6.5 ft x 6.5 ft X-Shape Magnetic Modular Fabric Display. 240g flame-retardant tension fabric, dye sublimation, double-sided. Tool-free magnetic assembly. Ships in 3 to 5 days.
Package includes
10 partsTension fabric backwall graphicQty 1
Single-sided, double available210 to 230 GSM dye-sublimated polyester, full 10 ft flat face.
32mm aluminum tube frameQty 1
Tool-free assembly1.1mm wall tubes, tool-free assembly in 15 to 25 min.
Snap-button spigot connectorsQty set
Standardized fitPush-fit joints click tubes together at every junction.
Stabilizing feetQty set
IncludedKeeps the backwall upright and level on any floor.
Connecting clipsQty set
IncludedAlign and lock panels across the frame.
Steel TV bracketQty 1
Fits 13 to 30 in monitorsFixed-height VESA mount for attendee video demos.
Podium with wheeled carry caseQty 1
Double-sided print37 in W x 40 in H x 17.5 in D, doubles as transport case.
Podium interior shelfQty 1
IncludedInternal shelf for stock, devices, or lead forms.
Zipper pillowcase coversQty 1
IncludedFabric sleeve zips around the frame, no hardware shows.
Carry bagsQty set
IncludedPadded bags for frame tubes and accessories.
Included at no extra costWorth $275
Expert design help$60
Padded carry bags$45
Priority production review$75
Nationwide delivery$95
Total value included$275
Six steps from click to delivered booth
How to orderStep 1
Select your product
Step 2
Choose size, options and delivery
Step 3
Checkout and pay
Step 4
Upload artwork or request design help
Step 5
Approve your email proof
Step 6
We print and ship to your door
Specifications
The 6.5 ft x 6.5 ft X-Shape Magnetic Modular Fabric Display runs four radial fins on an aluminum frame. Each fin is covered in flame-retardant 240g tension fabric and printed double-sided by dye sublimation. Built for indoor trade shows, conferences, and expos where a compact island footprint needs branded coverage from every approach angle.
- Material
- Flame-retardant 240g tension fabric (tightly woven polyester rated to resist ignition) on an aluminum frame.Stretches over each fin for a smooth, wrinkle-free surface that meets most indoor venue fire codes on first check.
- Print Method
- Dye sublimation.Ink bonds as a gas directly into the fabric fibers so color stays crisp and won't crack or peel across repeated pack-and-unpack cycles.
- Color Output
- Full-color across all four fin faces, front and back.Every branded surface reads with the same color depth regardless of which aisle a visitor approaches from.
- Finishing
- Tension fabric sleeves zip around each fin like a pillowcase (a fabric sleeve fitting over the frame with no visible hardware).Gives every face a clean, finished edge with no exposed frame showing through.
- Size
- 6.5 ft x 6.5 ft overall footprint across four radial fins.Fits most standard island and aisle-end booth assignments in that size range.
- Indoor/Outdoor Rating
- Indoor use only.Flame-retardant rating satisfies most indoor venue requirements. Not rated for outdoor weather exposure.
- Single/Double-Sided
- Double-sided on every fin.Front and back of each arm carries its own custom graphic, branding all four approach angles around the display.
- Shape
- X-Shape with four arms radiating from a central magnetic hub.Creates a true 360-degree island form in a compact square footprint with no flat backwall left unbranded.
Features
Key highlights
- Four Radial Fins on a Tool-Free Magnetic Aluminum Frame
- Flame-Retardant 240g Tension Fabric Printed Double-Sided on Every Fin
- True 360-Degree Island Visibility in a 6.5 ft Square Footprint
Four Radial Fins on a Tool-Free Magnetic Aluminum Frame
Aluminum frame sections lock at magnetic joints (snap-together connectors that align and hold without tools or loose hardware). One person can raise all four arms in minutes before the show floor opens. No wrenches. No loose bolts to drop at 7 a.m. A2Z Printing Hub builds the magnetic connection into the frame itself, so the joint faces seat flush every time you reassemble the kit between events. And because there's no hardware to misplace, your setup timeline stays predictable even on a crowded show morning.
Flame-Retardant 240g Tension Fabric Printed Double-Sided on Every Fin
Flame-retardant 240g tension fabric (a tightly woven polyester rated to resist ignition) wraps each fin front and back. That gives you eight branded surfaces across four arms. The 240g weight sits thick enough to hold smooth under frame tension without sagging at the fin edges. Dye sublimation color bonds into the fibers directly, so it won't crack or peel across multiple shows and pack cycles. Most indoor venues accept the flame-retardant rating on first inspection, which means you skip the back-and-forth with show management before load-in.
True 360-Degree Island Visibility in a 6.5 ft Square Footprint
Four arms radiate outward from a central hub so every aisle angle gets a branded face. That's the coverage most exhibitors only get from displays twice the size. The compact 6.5 ft x 6.5 ft footprint fits standard aisle-end and open island assignments without eating into neighboring booth space. But the visual reach goes well beyond the footprint: a visitor 30 ft down any aisle reads a bold, crisp graphic face before they reach your booth.
Customer reviews
0.0
No customer reviews yet.
Ideal for
Aisle-end island assignments at industry expos where three or four approach angles need branded coverage across all 6.5 ft of footprint.
Demo-day events where a sculptural centerpiece reads as a finished brand identity from across a crowded room.
Pharmaceutical and medical brands at conferences fitting a tight floor plan without losing 360-degree visibility.
Technology companies at multi-day shows who swap fin graphics between events without replacing the aluminum frame.
Recruitment teams at university career fairs where the X-shape draws students walking from both aisle directions at once.
Real estate and home improvement brands at consumer expos where two staff members can work opposite fins at the same time.
Marketing managers exhibiting at three or more shows per year who need one magnetic kit that packs fast between events.
Not the best fit for
Exhibitors assigned a standard inline row space with neighbors on both sides who only need a flat backwall. Inline Trade Show Booths cover that layout at lower cost.
Buyers who need a built-in podium, TV stand, or counter integrated into the structure. Modular Trade Show Booths include those accessories.
First-time exhibitors on the tightest budget who want the simplest possible setup before committing to a sculptural island form. Affordable Trade Show Booths are the better starting point.
How to choose
Use these buying points to choose the right 6.5 ft x 6.5 ft X-Shape Magnetic Modular Fabric Display configuration.
-
Booth Space Assignment and Aisle Exposure
Open island and aisle-end assignments with three or four exposed sides are where this display earns its footprint. Four double-sided fins cover every approach angle in a 6.5 ft square. But if your space faces only one aisle with neighbors on both sides, an Inline Trade Show Booth covers that need at a lower cost. Confirm your booth assignment type before you order anything.
-
Single-Show Use Versus Multi-Show Reuse
Here's the thing: the aluminum magnetic frame is built to go show after show. Cost per event drops after your first outing. If you exhibit at two or more shows per year, order the frame once and budget separately for replacement fabric fin sleeves as your messaging changes. One frame, many shows. That math works in your favor fast.
-
Solo Setup Versus Two-Person Crew
One person can lock all four magnetic arms without tools. And the frame step typically takes only a few minutes solo. That said, the fabric sleeve step moves faster with two people, and it reduces the chance of misaligning a fin under tension. Plan for a two-person crew on setup morning if your show schedule is tight and you cannot afford a slow start.
-
What if you're always exhibiting solo?
Budget roughly 15 to 20 extra minutes for the fabric sleeve step on your own. Practice the full setup at least once before show day so the sequence is familiar when the floor is busy around you.
-
Graphic Swap Frequency Between Events
Each of the four fins takes its own double-sided graphic sleeve. Swap one fin or all four between shows without touching the frame. Order a second set of fin graphics now if you run different messaging at different events. Replacement sleeves cost a fraction of a new kit, and the 240g flame-retardant fabric holds dye sublimation color across multiple pack-and-unpack cycles without fading.
Pair it with
Finish the Island Floor
A bare folding table inside the X-shape island breaks the branded look the fins create above it. A Branded Table Cover printed in the same full-color dye sublimation process ties the demo surface to the fin graphics so the whole footprint reads as one cohesive setup. Custom Flags at the nearest aisle entry pull foot traffic toward the display from roughly 30 to 50 ft away before visitors even see the fins.
Aisle-Entry Signage
Retractable Banner Stands flanking the two closest aisle approaches give visitors secondary messaging as they walk toward the X-shape center. Tabletop Displays on secondary tables inside the island perimeter carry product detail that the fin graphics do not have room to hold.
Larger Magnetic Shapes for Bigger Assignments
The same magnetic frame system scales up. The X-Shape Wave and L-Shape Magnetic Modular Fabric Displays use compatible aluminum sections at a larger footprint for exhibitors who outgrow the 6.5 ft square.
Different Booth Categories
Inline Trade Show Booths cover single-aisle row assignments where a flat backwall is all you need. Curved Trade Show Booths give a softer backwall silhouette for exhibitors who want a front-facing display without the island footprint.
FAQs
Does the X-Shape Frame Stay Rigid Once the Magnetic Joints Lock Under Fabric Tension?
Yes. Each aluminum arm seats at the central magnetic hub and pulls flush under the 240g tension fabric sleeve. The fabric tension actually helps hold the joint firm, not work against it. A clean joint face with no grit seats faster and holds more firmly, which is why we recommend wiping the contact points after every show.
Will the 6.5 ft x 6.5 ft X-Shape Magnetic Modular Fabric Display Pass Venue Fire Inspection Without Extra Paperwork?
The 240g tension fabric (a tightly woven polyester rated to resist ignition) carries a flame-retardant rating that satisfies most indoor venue fire codes on the first check. Bring your order documentation to the show floor. Most inspectors clear flame-retardant rated fabric without additional testing, but requirements vary by venue, so confirm with your specific show coordinator before arrival.
Can I Replace Just One Fin Graphic if a Single Face Gets Damaged Between Shows?
Yes, each fin takes its own double-sided graphic sleeve that zips on and off the aluminum arm independently. You do not need to replace all four fins or touch the frame. Order a single replacement sleeve, zip it over the damaged arm, and the display is back to full coverage. That flexibility is one reason repeat exhibitors keep this kit long-term.
How Does Dye Sublimation Color Hold Up After Multiple Pack-and-Unpack Cycles?
Dye sublimation bonds ink as a gas directly into the fabric fibers. It does not sit on the surface, so it cannot crack or peel the way surface-applied ink does. Color stays bold across repeated folding and unfolding. Fold the sleeves flat rather than bunching or rolling them, and steam out any creases before the show for the sharpest surface.
What Does the Carry Case Look Like, and Does It Fit in a Standard Cargo Van or SUV?
The kit ships in a carry case sized to hold the folded fabric fin sleeves and the disassembled aluminum magnetic frame. Most cargo vans and mid-size SUVs fit it without folding rear seats. Worth knowing: the case also protects the magnetic joint faces during transit, which is the most important reason to pack it correctly after every show.
Get your artwork right
Supply front and back artwork for every fin as separate files. Each face prints independently, so a single combined file causes misalignment at the panel boundaries of the X-shape geometry.
We accept
PDF
PNG
JPG
AI
- Accepted formats
- PDF, PNG, JPG, AI. Vector AI files are preferred for logos because they scale without softening edges.
- Resolution
- 150 DPI minimum, 300 DPI recommended. Anything under 150 DPI shows a soft, slightly blurry edge on the fin surface at close range.
- Bleed
- 0.25 in on all edges. Bleed (the extra image area beyond the trim line) prevents white slivers from appearing when the fabric sleeve stretches over the frame.
- Safe zone
- Keep all text and logos at least 0.5 in from the trim edge so nothing critical gets hidden in the sleeve seam.
- Color mode
- CMYK, not RGB. CMYK matches how we print, so colors on your screen come out as expected on the finished fabric.
Worth knowing: our free online design tool walks you through the X-shape fin layout with guides already in place. A professional design service is also available at checkout if you want our team to handle the panel setup.
Submit your booth panel artwork as print-ready files and our team sends you a free digital proof showing every graphic in position.
Shipping and delivery
How to Order
- 1. Upload front and back artwork for each fin as separate print-ready files and confirm the X-shape panel layout with our team. 2. Approve the free digital proof showing every fin face in position before production starts. 3. Production runs 3 to 5 business days. The kit ships in a carry case with the magnetic aluminum frame and folded tension fabric fins.
- Every order includes a free digital proof before we print. If anything looks off, we adjust at no charge.
Production and Shipping Timeline
Production typically runs 3 to 5 business days. The carry case ships from our US facility so lead times stay consistent. Order at least 2 weeks before your show date for standard production, or ask about rush options for tighter timelines. Volume discounts are available for orders of 10 or more.
Order at least 2 weeks before your show date for standard production, or choose rush production for tighter timelines. Multi-booth orders qualify for volume pricing.
Talk to us about your show dateOur promise
Nothing prints until you approve it.
You get a free digital proof first. If your order arrives damaged or off proof, we reprint it free. Checkout is secure and every order ships from the USA.
Reprint guaranteeDamaged or off-proof orders are reprinted at no costSee policy
Proof firstA free digital proof before production startsSee policy
Ships from the USANo overseas transit delays on domestic ordersSee policy
Secure paymentCheckout is secure and card data is never storedSee policy
Volume pricingMulti-booth and repeat orders qualify for volume ratesSee policy
If your order arrives damaged or doesn't match your approved proof, we reprint at no cost. That commitment covers every fin face, front and back.
A2Z Printing Hub backs every order with a free digital proof showing all four fin faces in position before production starts. The aluminum magnetic frame carries a lifetime hardware warranty. Checkout uses encrypted payment processing, and every kit ships from within the USA so lead times stay predictable. Volume discounts are available on multi-unit orders and replacement graphic sets. Contact us before checkout for pricing on orders of 2 or more kits.
Care instructions
Tension Fabric Fins
- Spot clean each fin sleeve with mild soap and water. Air dry completely before folding the sleeve back into the carry case. Packing a damp sleeve causes mildew inside the kit between shows.
- Fold fins flat into the included fabric bag rather than rolling or bunching them. Creases from bundling take longer to steam out before the next event, and repeated bunching weakens the fabric weave over time.
Aluminum Frame and Magnetic Joints
- Wipe the aluminum frame sections with a dry cloth after each show. But pay closest attention to the magnetic joint faces: grit or debris on the contact surface stops the joint from seating flush and slows setup at the next event.
- Check each joint for bent contact points before packing. A clean, undamaged joint face locks in seconds and holds firmly under fabric tension across the full 6.5 ft span.
