Custom Sandwich Board Signs - FAQ
A sandwich board is a specific type of A-frame: two flat panels hinged at the top, showing one face to foot traffic from each direction. Both fold flat for storage and transport. The term sandwich board typically describes signs with rigid faces (wood or aluminum) rather than snap-in insert frames. All three models in this subcategory use rigid faces on both sides.
Yes, and the difference is measurable. The retroreflective coating bounces headlights directly back toward the driver, making the sign readable from roughly 50 ft away in low light without any added fixture or power source. Standard aluminum does not do this. For parking lots or road-facing entrances where traffic arrives after dark, the reflective model is the only option in this subcategory that works.
Liquid chalk markers work on the chalkboard face and hold up better than traditional chalk sticks in light rain. Wipe the surface clean with a damp cloth when you want to change the message. Re-season the face monthly by rubbing chalk across the full surface and wiping clean. This keeps old messages from ghosting through new ones.
UV-printed aluminum typically lasts 6 to 12 months in direct sun before showing noticeable fade. Under a covered entry or in a shaded location, the graphics hold longer. The UV cure bonds ink directly to the aluminum surface, so the face resists rain and daily outdoor exposure without a separate laminate layer.
No. The frame and the printed face are separate. Order a new aluminum panel when your message changes and slide it into the existing frame. This makes seasonal updates straightforward without replacing the full unit. Volume discounts apply to panel reorders of 5 or more units.
