Custom Dry Erase A-Frame Signs
Custom Dry Erase A-Frame Signs with 36x24 in white panels, CMYK UV-printed coroplast inserts, double-sided display. Ships in 1 to…Custom Dry Erase A-Frame Signs with 36x24 in white panels, CMYK UV-printed coroplast inserts, double-sided display. Ships in 1 to 2 days. Built for daily sidewalk use.
Six steps from click to delivered booth
How to orderSpecifications
Custom Dry Erase A-Frame Signs are double-sided sidewalk signs built on a molded plastic frame, with white dry-erase panels and interchangeable coroplast inserts included. They suit restaurants, cafes, and retail shops that need to change their sidewalk message daily. No reprinting needed.
- Material
- White or black molded plastic frame. Includes 36 in x 24 in white dry-erase panels. Coroplast inserts (corrugated plastic, lightweight and weather-resistant) slide in for printed graphics.
- Print Method
- CMYK full-color UV print applied directly to coroplast inserts.UV ink cures under ultraviolet light for a scratch-resistant, waterproof finish on the sidewalk.
- Color Output
- Full-color CMYK on coroplast inserts. Dry-erase panel accepts any standard dry-erase marker and wipes clean with a dry cloth.
- Finishing
- Coroplast inserts slide into the frame and are interchangeable. Dry-erase panel attaches using included Velcro, so assembly takes only a few minutes.
- Size Range
- Overall frame is 45 in x 25 in. Dry-erase panel is 36 in x 24 in, the standard sidewalk A-frame insert size.
- Indoor/Outdoor Rating
- Suitable for indoor and outdoor use. UV-printed coroplast inserts hold up 6 to 12 months outdoors in direct sun. Dry-erase panels last indefinitely with proper care.
- Single/Double-Sided
- Double-sided display. Both faces stay visible to foot traffic from either direction, so one sign covers both sides of a sidewalk entrance.
- Weight
- Roughly 15 lbs. The built-in handle lets one person carry the frame in and out each day without help.
Features
Key highlights
- White Dry-Erase Panels That Wipe Clean Every Day
- CMYK Full-Color UV Print on Coroplast Inserts
- Double-Sided Display on a 45 in x 25 in Plastic Frame
White Dry-Erase Panels That Wipe Clean Every Day
Each sign includes 36 in x 24 in white dry-erase panels so you can rewrite your daily specials, hours, or menu items in seconds. No ordering new graphics. The surface wipes clean with a dry cloth or eraser, and stubborn marks come off with a small amount of rubbing alcohol. Quick to update. Easy to reset.
CMYK Full-Color UV Print on Coroplast Inserts
Coroplast inserts (corrugated plastic sheeting, lightweight and weather-resistant) carry a full-color CMYK UV print that slides into the frame. Swap it out when your message changes. UV ink (cured under ultraviolet light) bonds to the coroplast surface for a scratch-resistant, waterproof finish that holds up on a wet sidewalk. Here's the thing: you can run a printed insert for your logo and a dry-erase panel for your daily specials, swapping between them as your needs shift. A2Z Printing Hub sends you a free digital proof before anything goes to press. Sharp colors. Crisp edges.
Double-Sided Display on a 45 in x 25 in Plastic Frame
The plastic frame measures 45 in x 25 in overall and displays your message on both faces, so foot traffic from either direction reads your sign without turning around. Assembly takes only a few minutes using the included Velcro hardware. The built-in handle lets one person carry the whole 15 lb frame in each morning and out each evening. Choose white or black frame to match your storefront.
Customer reviews
We use these for temporary notices and quick announcements. They're a handy and cost-effective solution.
Updating our messages is a breeze with the dry-erase surface. Just wipe off the old and write in the new.
It's very lightweight and easy to move around our store as needed. Great for highlighting different products or promotions.
This frame is an affordable and functional way to display temporary messages. The dry-erase surface works well.
The economy white dry-erase frame is perfect for displaying our daily specials. It's easy to write on and wipe clean, and the white frame looks neat.
Ideal for
Not the best fit for
Highway or roadside advertising where your sign needs to read clearly from more than 30 ft away. Custom Flags or Custom Banners give you the height and size distance viewing needs.
Permanent indoor wall-mounted signage where a fixed display suits the space better. Custom Signs in metal or acrylic hold up longer for that application.
Large-format branding backdrops or building facade displays. Custom Banners cover the scale a 45 in x 25 in A-frame cannot match.
How to choose
Use these buying points to choose the right Custom Dry Erase A-Frame Signs configuration.
-
Writing Surface Versus Printed Insert
Here's the thing: your message frequency decides this one. Write on the 36 in x 24 in dry-erase panel when your content shifts daily, like restaurant lunch specials, salon walk-in slots, or coffee shop rotating drinks. The panel wipes clean with a dry cloth and accepts any standard dry-erase marker, so you're never waiting on a reprint.
Choose a UV-printed coroplast insert when your message holds for weeks at a time, like store hours, a logo, or a seasonal promotion. It's corrugated plastic sheeting that slides directly into the frame. Both options use the same 36 in x 24 in insert size, so they're fully interchangeable. Order one of each and swap based on what your sidewalk needs that week.
-
Daily Portability Versus Static Placement
The 15 lb plastic frame carries in and out with one hand using the built-in handle. That weight is light enough for a single staff member to move before open and after close every day without strain.
But if your sign stays in one fixed spot through wind and foot traffic, add a sandbag weight at the base. The frame is not engineered to anchor itself against sustained gusts without added ballast. Static placement works well for entrances set back from open streets. Exposed corners need that extra weight.
-
Single Location Versus Multiple Locations
One frame per location keeps your messaging consistent without confusion. Order the frame once, then stock extra 36 in x 24 in inserts for each spot so your team can swap graphics without moving frames between addresses.
For 5 or more units, ask about bulk pricing before you place your order. The configurator shows your adjusted price at checkout, so you see the savings before you commit.
Pair it with
FAQs
Will the Dry-Erase Surface Ghost or Stain After Daily Use?
Ghosting (faint shadow marks left after wiping) typically shows up when ink sits on the panel too long or when a permanent marker gets used by mistake. Wipe the 36 in x 24 in dry-erase panel clean each day with a dry cloth right after use. For stubborn marks, a small amount of rubbing alcohol on a cloth removes residue without damaging the surface.
Can I Use Any Dry-Erase Marker, or Only the One Included?
The sign ships with one black dry-erase marker, but the panel works with any standard dry-erase marker. Do not use permanent markers on the dry-erase surface. Permanent ink bonds differently and won't wipe off cleanly, even with rubbing alcohol.
How Do I Keep the Sign From Blowing Over on a Windy Day?
The 15 lb plastic frame handles light to moderate wind on its own. On gusty days, place a sandbag weight at the base of the frame. You can also bring the sign inside during heavy weather and carry it back out using the built-in handle when conditions settle.
Does the Frame Arrive Assembled, or Do I Have to Put It Together Myself?
Simple assembly is required. You attach the dry-erase panel to the frame using the included Velcro hardware, which takes a few minutes. The frame ships in one box measuring 4 in x 26 in x 47 in. No tools are needed.
Can I Order Replacement Dry-Erase Panels If Mine Gets Damaged?
Replacement dry-erase panels are not available separately. That said, the coroplast insert slot accepts any 36 in x 24 in coroplast panel. Order printed inserts as a replacement display surface if the dry-erase panel is no longer usable.
Get your artwork right
Coroplast inserts (the corrugated plastic panels that slide into your A-frame) carry a CMYK UV print. Ink cures under ultraviolet light for a scratch-resistant, waterproof finish. Your file needs to match that process exactly.
- File Formats
- PDF, PNG, JPG, or AI accepted. AI (vector) files work best for logos because they scale without losing sharpness.
- Resolution
- 150 DPI minimum. For inserts under 36 in wide, 300 DPI is the right call. Anything softer and you'll see blurry edges on the final panel.
- Bleed
- Add 0.25 in on all four sides so the print reaches the trim edge cleanly.
- Safe Zone
- Keep all text and logos at least 0.5 in inside the trim edge. Anything closer risks getting cut.
- Color Mode
- Set your file to CMYK before exporting. RGB (the color mode screens use) shifts when converted at print time, so colors come out differently than expected on screen. CMYK is not optional here.
Need help building your insert artwork from scratch? Our free online design tool gets you started in minutes. Or, our professional design service builds it for you. Submit your artwork and we send a free digital proof showing your graphics on the sign panel within 24 hours.
Shipping and delivery
How to Order
- Choose your frame color (white or black plastic) and decide whether you want dry-erase panels, printed coroplast inserts, or both.
- Upload your artwork for printed inserts in PDF, PNG, JPG, or AI format. For dry-erase only orders, skip the upload and select blank panels. Approve your free digital proof within 24 hours. If anything looks off, we adjust at no charge.
- Your A-frame ships in one box measuring 4 in x 26 in x 47 in. Most orders leave our facility within 1 to 2 business days after proof approval.
Production and Shipping Timeline
Production runs 1 to 2 business days after proof approval. Standard ground shipping adds roughly 2 to 5 business days depending on your location. Order before 12 PM EST to start production the same day.
Volume discounts apply for orders of 10 or more. Order before 12 PM EST and your A-frame ships within 1 to 2 business days, frame and inserts included. Bulk pricing is available for multi-location orders.
Talk to us about your show dateOur promise
Nothing prints until you approve it.
You get a free digital proof first. If your order arrives damaged or off proof, we reprint it free. Checkout is secure and every order ships from the USA.
If your order arrives damaged or doesn't match your approved proof, we reprint at no cost. Send us a photo and we handle it fast, no back-and-forth needed.
A2Z Printing Hub reviews every uploaded file before sending your proof, so resolution and bleed issues get caught before anything prints. Every order ships from our USA facility, which means no overseas delays or customs holds. Checkout is encrypted and accepts all major credit cards and PayPal.
Care instructions
Dry-Erase Panels
- Use dry-erase markers only on the white panel surface. Wipe clean with a dry cloth or eraser after each use. For stubborn marks or ghosting, apply a small amount of rubbing alcohol to a cloth and wipe the surface. Do not use permanent markers on the dry-erase surface.
Plastic Frame
- Rinse with a hose or wipe with a damp cloth. Use mild soap for dirt buildup around the handle and base. Carrying the frame inside each evening extends its outdoor life significantly.
Coroplast Inserts
- Wipe with a damp cloth and mild soap. UV-printed graphics typically hold up 6 to 12 months outdoors in direct sun. Store inserts flat indoors when not in use to prevent warping.
Velcro Attachment
- Check the included Velcro strips seasonally and press firmly to reseat if the panel feels loose. Replace with standard hook-and-loop tape if adhesion weakens.
