Custom Windsign Wind Resistant A-Frame Signs
Custom Windsign Wind Resistant A-Frame Signs on molded plastic frames with 4 mm coroplast inserts. Full-color UV print. Ships in…Custom Windsign Wind Resistant A-Frame Signs on molded plastic frames with 4 mm coroplast inserts. Full-color UV print. Ships in 1 to 2 days. Built for daily sidewalk use.
Six steps from click to delivered booth
How to orderSpecifications
Custom Windsign Wind Resistant A-Frame Signs run on a molded plastic frame with 4 mm coroplast inserts printed in full-color UV ink. They suit any storefront, cafe, or salon that moves its sidewalk sign in and out daily and needs graphics it can swap without replacing the whole frame.
- Material
- 4 mm coroplast inserts (corrugated plastic, rigid and waterproof). Molded plastic frame, lighter than metal angle iron.Coroplast holds a direct UV print without absorbing moisture, so outdoor graphics stay intact through rain and humidity.
- Print Method
- Direct UV print bonds ink to the coroplast surface and cures it with ultraviolet light.The cured finish is scratch-resistant and waterproof. It does not peel or crack under typical outdoor conditions.
- Color Output
- Full CMYK (cyan, magenta, yellow, and black combined to reproduce the full color spectrum) on every insert.Logos, photos, and bold text all reproduce accurately at sidewalk viewing distances.
- Finishing
- Coroplast inserts slide into the frame from the top and lock in place with no tools needed.Swap a panel in under a minute. No hardware, no help.
- Size Range
- Standard insert size is 24 x 36 in, which reads clearly from roughly 10 to 15 ft away.This fits most sidewalk placements without blocking pedestrian clearance.
- Indoor/Outdoor Rating
- Rated for both indoor and outdoor use. UV-printed inserts hold up 6 to 12 months in direct outdoor sun.The molded plastic frame handles moderate sidewalk wind without tipping.
- Single/Double-Sided
- Double-sided display on both faces simultaneously.Foot traffic from either direction on the sidewalk sees your message without repositioning the sign.
- Weight
- Molded plastic frame weighs roughly 10 to 13 lbs.Light enough for one person to carry by the top handle or roll on the base wheels without help.
Features
Key highlights
- Molded Plastic Frame With Handle and Wheels for Daily Move-In
- 4 mm Coroplast Inserts With Full-Color UV Print
- Interchangeable Double-Sided Display on Both Faces
Molded Plastic Frame With Handle and Wheels for Daily Move-In
The molded plastic frame rides on base wheels and lifts by a top handle. One person rolls it out each morning and back in each night. No dolly. No second set of hands. A2Z Printing Hub builds this portability into every Windsign frame because sidewalk signs that are hard to move get left inside. The frame weighs roughly 10 to 13 lbs, which keeps daily carry-in manageable without adding ballast. (Print durability gets full treatment in Get Your Artwork Right.)
4 mm Coroplast Inserts With Full-Color UV Print
Coroplast inserts (corrugated plastic sheeting, rigid and waterproof like cardboard built for outdoor use) run 4 mm thick on every panel we print. Direct UV print bonds ink to the coroplast surface and cures it with ultraviolet light, giving you a scratch-resistant, waterproof finish that won't peel or crack. Colors stay sharp through rain and direct sun for 6 to 12 months outdoors. But the real advantage is replacement cost: when graphics look worn, you swap the insert, not the frame. Bold logos, photos, and crisp text all reproduce accurately in full CMYK color.
Interchangeable Double-Sided Display on Both Faces
Both faces of the sign show your message at the same time, catching foot traffic from either direction on the sidewalk. Fresh inserts slide in from the top and lock in place with no tools. Pull the old panel out, slide the new one in, and the sign is ready in under a minute when your promotion changes. That kind of speed matters on a Tuesday morning before the lunch rush starts.
Customer reviews
The Windsign is a highly effective way to advertise outdoors. It's visible and stays put, no matter the weather.
Filling the base with sand was easy and provides excellent stability. We haven't had any issues with it tipping over.
This sign is very durable and has held up well in all kinds of weather conditions. A reliable outdoor signage solution.
The double-sided display is great for catching attention from both directions of traffic.
The Windsign really lives up to its name! It stays put even in strong winds, which is essential for our exposed location.
Ideal for
Not the best fit for
Highway or roadside advertising needs a sign that reads from 50 ft or more. Custom Flags and Custom Banners cover that distance better than a 24 x 36 in insert can.
Permanent wall-mounted indoor signage is a different format entirely. Custom Signs handle fixed wall display without a freestanding frame in the way.
Large-format facade branding at building scale sits beyond what a 24 x 36 in coroplast insert can cover. Custom Banners handle that scale.
How to choose
Use these buying points to choose the right Custom Windsign Wind Resistant A-Frame Signs configuration.
-
Printed Coroplast Versus Dry Erase Insert for Your Daily Content
Here's the thing: the insert type matters more than most buyers realize before they order. Printed coroplast inserts lock in sharp, UV-cured graphics that hold up 6 to 12 months outdoors without fading. They suit any message that stays stable for weeks: hours, directions, a core menu, or seasonal branding. Dry erase inserts work when your message shifts daily (a soup special, a happy hour price, a walk-in wait time). The smartest move is one frame with both: printed inserts for your permanent branding and one dry erase insert for daily updates.
-
Standard Placement Versus Wheeled Daily Transport
Your move-in routine determines which frame suits your location. The Windsign rolls on base wheels and lifts by a top handle, so one person handles the morning roll-out and the evening carry-in without a dolly. That suits any storefront where the sign comes inside every night. If your sign stays in one fixed outdoor spot around the clock, a heavier metal angle iron frame at roughly 15 to 20 lbs gives you more ground-level stability in sustained wind. Pick the Windsign when daily portability matters more than maximum weight.
-
Single Insert Order Versus Bulk Insert Reorder for Seasonal Use
Inserts reorder without replacing the frame, so your cost per update drops after the first order. Order two or three sets of coroplast inserts upfront if you run seasonal promotions or manage more than one location. Bulk pricing applies at 5 or more units. Contact us before placing a multi-location order so we can quote accurate pricing.
-
Windsign Molded Plastic Frame Versus Metal Angle Iron Frame
The Windsign molded plastic frame weighs roughly 10 to 13 lbs and handles moderate sidewalk wind without tipping. But corner locations or open blocks with stronger gusts call for more ground weight. A metal angle iron frame at roughly 15 to 20 lbs sits lower and heavier, giving you more stability in those spots. Choose the Windsign for portability. Choose the metal frame for fixed high-wind placement.
Pair it with
FAQs
Will the Windsign Plastic Frame Tip Over on a Windy Sidewalk?
The molded plastic frame weighs roughly 10 to 13 lbs, which holds steady in moderate sidewalk wind. That said, corner locations or open blocks with sustained gusts push beyond what the Windsign handles reliably. For those spots, a metal angle iron frame at roughly 15 to 20 lbs gives you more ground-level stability. Bring the Windsign inside during heavy wind events regardless of frame type.
Can I Change the Coroplast Inserts Myself Without Any Tools or Help?
Yes. Coroplast inserts slide in from the top of the frame and lock in place with no tools, no clips, and no second set of hands. Pull the old insert straight up and out, drop the new one in, and the sign is ready in under a minute. Order a second set of inserts when your promotion changes and you never touch the frame again.
How Long Will the Printed Coroplast Inserts Last Before the Colors Fade Outdoors?
UV-printed coroplast inserts hold up 6 to 12 months in direct outdoor sun before fading becomes visible. Inserts stored indoors overnight (which the Windsign's portability makes easy) last toward the longer end of that range. Weather resistance is built into the UV ink cure, not a surface coating, so rain and humidity do not accelerate fading the way they do on inkjet-printed stock.
Do Custom Windsign Wind Resistant A-Frame Signs Come With a Proof Before Printing Starts?
Every printed coroplast insert order gets a free digital proof within 24 hours of us receiving your file. We do not start printing until you approve it. That proof shows your actual graphics on the insert panel so you catch any layout or color issue before ink hits material.
What File Types Do You Accept for the Coroplast Insert Artwork?
We accept PDF, PNG, JPG, and AI files. Set your color mode to CMYK before exporting, since RGB files shift color during conversion and the print result won't match your screen. Minimum resolution is 150 DPI, but 300 DPI is the better target for a 24 x 36 in insert where customers read from roughly 10 to 15 ft away.
Get your artwork right
Your coroplast insert prints at full CMYK color, so the file you send determines how sharp the final panel looks on the sidewalk.
- Accepted formats
- PDF, PNG, JPG, AI. Vector files (AI or PDF with embedded fonts) work best for logos because they scale without softening edges.
- Resolution
- 150 DPI is the floor. We recommend 300 DPI for any insert under 24 x 36 in. Viewers standing roughly 3 to 5 ft away will notice a soft edge on text and fine detail.
- Bleed
- 0.25 in on all sides. This gives the cutter a margin so no white border appears at the panel edge.
- Safe zone
- Keep all text and logos at least 0.5 in from each edge. Anything closer risks trimming.
- Color mode
- CMYK, not RGB. RGB is built for screens. CMYK matches how we actually lay ink on coroplast, so the colors you see in your file match what prints.
Need help building the layout from scratch? Our free online design tool is available at checkout. Or choose our professional design service and we build the insert file for you.
Submit your A-frame insert artwork and our team sends you a free digital proof showing your graphics on the sign panel within 24 hours.
Shipping and delivery
How to Order
- Choose your frame type and insert type (printed coroplast, dry erase, or chalkboard), then upload your artwork or select a blank insert.
- We send a free digital proof within 24 hours of receiving your file. Every order includes this proof before we print. If anything looks off, we adjust at no charge.
- Once you approve the proof, your Windsign frame and printed inserts ship together within 1 to 2 business days, ready to roll out on arrival.
Production and Shipping Timeline
Production runs 1 to 2 business days after proof approval. Orders placed before 12 PM EST ship the same production cycle. Frame and inserts ship together in one package, so nothing arrives separately.
Worth knowing: volume discounts apply for orders of 10 or more units. Contact us before placing a multi-location order to get accurate pricing.
Order before 12 PM EST and your A-frame ships within 1 to 2 business days, frame and inserts included. Bulk pricing available for multi-location orders.
Talk to us about your show dateOur promise
Nothing prints until you approve it.
You get a free digital proof first. If your order arrives damaged or off proof, we reprint it free. Checkout is secure and every order ships from the USA.
If your order arrives damaged or doesn't match your approved proof, we reprint at no cost. Send us a photo and we handle the rest, no back-and-forth required.
Every printed coroplast insert order includes a free digital proof we send within 24 hours. We do not start printing until you approve it. A2Z Printing Hub ships every order from our USA facility, so you're not waiting on overseas fulfillment. Checkout runs on encrypted payment processing on every order.
Care instructions
Molded Plastic Frame
- Wipe the frame with a damp cloth and mild soap after outdoor use. Rinse with a hose for heavier dirt buildup. The plastic handles daily exposure well, but carrying it inside each night extends its life significantly.
- Store the frame upright or flat in a dry space overnight. It weighs roughly 10 to 13 lbs, so one person manages storage without help.
Coroplast Inserts
- Wipe printed inserts with a damp cloth and mild soap. UV-printed graphics typically hold up 6 to 12 months in direct outdoor sun before fading begins. Store inserts flat when not in use to prevent warping.
- Order replacement inserts when graphics look worn rather than replacing the whole frame. For dry erase inserts, use dry erase markers only and wipe clean with a dry cloth. Stubborn marks come off with rubbing alcohol on a cloth.
